NHL 2006
Page 7 of 8 Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
StarShine




Posts: 782

PostPosted: Sat, 17th Sep 2005 03:04    Post subject:
flamergris wrote:
Seron wrote:
flamergris - what kind?


Im using an EMS ... its a converter for using psx controllers. Im using ps2 controllers.... its from hkems.

It has the same problem as the other dude...the menu keeps scrolling up. Only option for me is to press downwards on both psx conrollers simultaneously ... then the selection is still and i can use the menu... otherwise it just keeps movin.

It works fine to play with....but i still cant change the lines. I suppose it thinks of the z key as one of them, but everytime i press select it keeps pulling the goalie Razz dunno why.


Those PS2 controller adaptors have always caused the problem of menus scrolling uncontrollably within certain games. Last ones I tryed my adaptor with were Metal Gear Solid 2 and some EA sports title and I had the exact same problem, I've seen posts by people claiming to have fixed the problem by making changes to the registry I ended up just going back to my Logitech dual analogue rumblepad though.

@comp2k you've probably already done this but if you have a throttle slider on your joypad make sure its set to its deadzone if it isn't that can cause menus to scroll up or down in games. Smile
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Sat, 17th Sep 2005 03:18    Post subject:
regestry edit it this:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\Joystick\OEM\VID_124B&PID_4D01]
"OEMName"="XXXX"

VID is your controller
change this to the controler you want it to be. 'Gamepad Pro USB' works great for me
Back to top
flamergris




Posts: 19

PostPosted: Sat, 17th Sep 2005 04:34    Post subject:
wtf...i cant see the right side of the post now (friday nite) ... typical....now i can not test the regedit thingy thing. Is a lil hard if i cant see the the last lines:P
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Sat, 17th Sep 2005 05:43    Post subject:
registry edit it this:

[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\MediaProperties\PrivateProperties\
Joystick\OEM\VID_124B&PID_4D01]
"OEMName"="XXXX"

VID is your controller (number depends on your controller)
change this to the controler you want it to be.
'Gamepad Pro USB' works great for me

that better? Wink
Back to top
zagaz




Posts: 10

PostPosted: Sat, 17th Sep 2005 09:18    Post subject:
I'm fucking pissed, look what I found on Ea's NHL 2006 boards:


Look what those bastards did. They changed without notice the minimum specs on their website. Just take a look under support for "What are the minimum requirements?"

*
Windows XP or Windows 2000 operating systems.
*
1 GHz Intel Pentium III or equivalent with SSE.
*
256 MB or more RAM.
*
At least 1.7 GB free hard disk space.
*
Supported DirectX 9.0c compatible 3D accelerated 32 MB video card.
*
56K or faster connection for online play.

I'm forever done with EA, they operate in the industry like nasty theifs. They began to lie sayin' that it was a problem with our graphic drivers, chipset drivers, directx..name it. We lost money and precious time figuring out ourselves what was the problem and when they had no choice to admit it, they stabbed us in the back by updating the min specs without our knowledge. What happens now to folks who had bought the game with the wrong specs and to those who will buy the same boxes currently on the shelves...NOTHING..we got screwed..we should sue the bastards
Back to top
flamergris




Posts: 19

PostPosted: Sat, 17th Sep 2005 09:20    Post subject:
mmmm...... so i can just name the thing whatever i want, or does it have to be some known gamepad that it can identify?
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Sat, 17th Sep 2005 11:02    Post subject:
has to be a name for a controller the game supports. like i said "Gamepad Pro USB" works like a charm for me, or "Logitech Dual Action Pro" etc. just make sure you change the right VID key. Just check Controllers in the control panel and look what name it says, then go through the different VID's until you see your controller. Mine was the last one....


1F U C4N R34D 7H1S, U R34LLY N33D 70 G37 L41D

Back to top
comp2k




Posts: 43

PostPosted: Sat, 17th Sep 2005 12:22    Post subject:
I did like you said werdercanuck and it works fine now. Thanks and cheers mate! =)
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Sat, 17th Sep 2005 12:31    Post subject:
not a problem Smile


1F U C4N R34D 7H1S, U R34LLY N33D 70 G37 L41D

Back to top
flamergris




Posts: 19

PostPosted: Sat, 17th Sep 2005 18:47    Post subject: controllers are still focked
hmmm.....im not sure about this registry thing. I mean my current controller is registrered as a 16 button 4 axis gamepad (swedish translation). Now i right clicked OEMname, and there are 2 fields.

first one says :
Value: OEMname

second line says:
Data: 16 button, 4 axis game(name of the controller).

I have changed the Data field so it says: Gamepad Pro USB

Do i need to add something like ".." or anything like that?

Id like some more examples as to what i can write as examples for controller names...becasue right now it sure doesnt work. I still can not change lines using the gamepad. I mean it works with the keyboard. But....when i use the gamepad it doesnt say anything about what button i should press to be able to change the lines....and so....i can not change the lines. Razz. However....if i press select (its a psx controller...it has select and start buttonss) it pulls the goalie....lmao! but i can not change the lines no matter how i try and what buttons i combine or use.

ow....some more info on the thing i use: its an EMS with double contacts, so i have 2 controllers attached to one USB contact....dunno if that makes any difference...

any suggestions?
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Sat, 17th Sep 2005 19:58    Post subject:
just check a readme.txt from any ea game and you can use any controller that is listed in there (under supported controllers) just copy'n'paste the name. PSX controller 16 buttons? they only have 12 ...... L1/2/3, R1/2/3, O, X, triangle, square, start, select.....


1F U C4N R34D 7H1S, U R34LLY N33D 70 G37 L41D

Back to top
TheDamned




Posts: 508
Location: Montréal,QC, Canada
PostPosted: Sun, 18th Sep 2005 00:02    Post subject:
You guys are dumb, I have a T-Bird 1Ghz that I use as a server and I tested it with NHL06 and it ran very well... I don't think T-Birds have SSE... Anyway, work your ass off and buy yourself a new cpu.
Back to top
flamergris




Posts: 19

PostPosted: Sun, 18th Sep 2005 00:14    Post subject: psx HAS 16 buttons....
mmmmm... actually...the other four are for the D-pad.....they are registered as buttons. so the 12 + the 4 that represents the D-pad on the psx2 controller Razz

i guess i have to buy some new gamepad then..... bleugh...i also need a new graphix card...n me who thought i wouldd w8 a while untill the prises for the 7800 series goes down.
Back to top
flamergris




Posts: 19

PostPosted: Sun, 18th Sep 2005 01:24    Post subject: HOW DO I CHANGE THE LINES???§
oki....now im actuallyn a lil pissed off....i unplugged my dear sweet psx2 controllers, and i inserted my microsoft sidewinder gamepab USB....And i just dont get it...HOW DO I CHANGE THE LINES MANUALLY??? it works fine when im using the keyboard....but other then that it is just totally f.o.c.k.e.d.

I mean...the microsoft sidewinder gamepad is an ol trustworthjy gamepad.
..but it just doesnt work. The scrolling in the menus did however
stop when i unplugged the psx controls. But its kind of pointless
if i can not change the lines. PLZ tell me how the heck u do to change
ur lines manually? When i press the modifier button on the sidewinder
gamepad along with the D-pad its got...nothing happens except i control my
character. WHen i press button 10 (center button, marked with
a single . on it) i pull my focking goalie!!!!

I just dont get it? wtf r u supposed to do to be able to change the lines
manuallyyy??? *tearing off big chunks of hair in desperation*
Back to top
flamergris




Posts: 19

PostPosted: Mon, 19th Sep 2005 03:25    Post subject: changing the lines manually using gamepad
oki....so....i figured it out.

I have an old gamepad thats half broken, called firestorm dual power 2 (not supported according to the .txt, but it worx)
so i plugged it in, n it worx to change the lines by pressing the
modifier and using the d-pad.

Now the only mystery remains as to why i cant get my
EMS to work with my psx2 controllers. But for now im
happy bein able to change the lines again! Now, when i use the
psx2 i can not use the D-pad when i have activated the analogue
sticks. And i guess u need both to be able to change the lines manually.
So...ill try out some of the names n hope for the best.

ow...thx guys for the help....forum used as groupware worx!
share the knowledge!!! wohoo (geez thats geeky:p)
Back to top
flamergris




Posts: 19

PostPosted: Mon, 19th Sep 2005 04:05    Post subject: doesnt work with some of the names..am i doin something wron
hmmm it still doesnt work with the EMS

if it worx....does the menu stop "looping" when u start the game?
nyway i wonder why? i dunno if im writing it correctly in the registry
can u give me some exact examples as to what i can write?
i have tried the following:
Gamepad Pro USB
Thrustmaster Firestorm Dual Power 3
Logitech Rumble Pad 2

I have typed it EXACTLY the way it is typed above...
u think ive missed a comma or something? i dunno....

Isnt there something u can write that states its the ps2 controller or
that its an EMS with 2 controllers at one USB port?

ow...btw the 16 buttons are: triangle, Square, circle, Cross,
4 buttons (D-pad), L1, L2, R1, R2, select, start,
pressin down analouge left and pressin down analogoue right (as buttons)
= 16
Back to top
flamergris




Posts: 19

PostPosted: Mon, 19th Sep 2005 05:20    Post subject: hmmmm
well...ive tried upgradin the drivers for the ems

u can select between advanced and normal mode for both the
D-pad and the analogue sticks.
analouge: no difference either way.
D-pad: when switched to advanced mode it crashes the game on startup.


I dunno if thats the key...but i hope im getting somewhere now...

let me know if this has happened to others usin the EMS
Back to top
White_Knight




Posts: 132

PostPosted: Mon, 19th Sep 2005 22:27    Post subject:
I have a Saitek Cyborg RumbleForce P2500 game controller and am having problems using it in this game. Everytime I try to grab/skate with the puck, my player will just start twirling around and around and lose the puck. This gamepad is apparently supported by this game. Any ideas??

Thanks!
Back to top
White_Knight




Posts: 132

PostPosted: Mon, 19th Sep 2005 22:40    Post subject:
ahhh....found a fix for the Saitek Cyborg controller issue....hope it works:

for those of you using Saitek's p880 gamepad, you need to apply this fix:

I have a fix for you P880 guys

Click start/run/regedit and browse to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\MediaProperties\PrivateProperties\Joystick\OEM\

There you will see a bunch of folders named something like VID_1038&PID_0100, open each of them until you see Saitek P880 listed on the right hand side of the screen in the OEMName category.

Now double click on OEMName, a new box will pop up with the controller name inside, rename it to Logitech Dual Action, click ok and exit regedit. That should get rid of the spinning.
Back to top
werdercanuck




Posts: 1562
Location: Pot Capital of Canada (BC)
PostPosted: Mon, 19th Sep 2005 23:15    Post subject:
White_Knight wrote:
ahhh....found a fix for the Saitek Cyborg controller issue....hope it works:

for those of you using Saitek's p880 gamepad, you need to apply this fix:

I have a fix for you P880 guys

Click start/run/regedit and browse to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\MediaProperties\PrivateProperties\Joystick\OEM\

There you will see a bunch of folders named something like VID_1038&PID_0100, open each of them until you see Saitek P880 listed on the right hand side of the screen in the OEMName category.

Now double click on OEMName, a new box will pop up with the controller name inside, rename it to Logitech Dual Action, click ok and exit regedit. That should get rid of the spinning.


should scroll up a bit dude, i already posted that trick Rolling Eyes
Back to top
White_Knight




Posts: 132

PostPosted: Tue, 20th Sep 2005 01:09    Post subject:
werdercanuck wrote:
White_Knight wrote:
ahhh....found a fix for the Saitek Cyborg controller issue....hope it works:

for those of you using Saitek's p880 gamepad, you need to apply this fix:

I have a fix for you P880 guys

Click start/run/regedit and browse to

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\MediaProperties\PrivateProperties\Joystick\OEM\

There you will see a bunch of folders named something like VID_1038&PID_0100, open each of them until you see Saitek P880 listed on the right hand side of the screen in the OEMName category.

Now double click on OEMName, a new box will pop up with the controller name inside, rename it to Logitech Dual Action, click ok and exit regedit. That should get rid of the spinning.


should scroll up a bit dude, i already posted that trick Rolling Eyes


sorry dude, but my controller was listed as supported and your post said to make sure its one that is supported, so i guess i kinda read past your post and searched elsewhere for a solution. THis one that i found was plain as day and was specific to the controller i was having difficulty with and actually the problem was different too....my problem had to do with the players spinning round and around...nothing to do with the menus... Twisted Evil
Back to top
medeirosm




Posts: 289
Location: Canada
PostPosted: Tue, 20th Sep 2005 01:55    Post subject:
back to the game itself.

anyone else having the computer just one-timing like crazy?

they just rush down the side and center the pass and have the other winger or center blast it on net and that's all they do!

I find i gotta just let the guy go down the side and i'll just run interference on whoever is in front of the net.

anyways, good game otherwise
Back to top
Phluxed
VIP Member



Posts: 4911
Location: Oakville, Ontario, Canada
PostPosted: Tue, 20th Sep 2005 08:39    Post subject:
medeirosm wrote:
back to the game itself.

anyone else having the computer just one-timing like crazy?

they just rush down the side and center the pass and have the other winger or center blast it on net and that's all they do!

I find i gotta just let the guy go down the side and i'll just run interference on whoever is in front of the net.

anyways, good game otherwise


They do quite a few one timers. However, after watching the pre-season, thats more realisitc than we give it credit for. Just need to call more penalties.


Back to top
medeirosm




Posts: 289
Location: Canada
PostPosted: Tue, 20th Sep 2005 16:06    Post subject:
Phluxed wrote:
medeirosm wrote:
back to the game itself.

anyone else having the computer just one-timing like crazy?

they just rush down the side and center the pass and have the other winger or center blast it on net and that's all they do!

I find i gotta just let the guy go down the side and i'll just run interference on whoever is in front of the net.

anyways, good game otherwise


They do quite a few one timers. However, after watching the pre-season, thats more realisitc than we give it credit for. Just need to call more penalties.



Yuh, I suppose, but it's a pain in the ass trying to defend against it.
Back to top
Slade-7




Posts: 2

PostPosted: Sun, 25th Sep 2005 15:00    Post subject:
Does anybody else have problems with the menu? It doesnt show properly and always keep showing what was shown before like the NHL logo and stuff
no menu at all
Back to top
Slade-7




Posts: 2

PostPosted: Sun, 25th Sep 2005 15:25    Post subject:
ah nevermind
found the solution.... vsync has to be turned to "app. pref."
Back to top
vadox6466




Posts: 2

PostPosted: Sat, 8th Oct 2005 21:42    Post subject:
How do you guys play online without a valid CD key? Or did all of you buy the game? o_0
Back to top
Phluxed
VIP Member



Posts: 4911
Location: Oakville, Ontario, Canada
PostPosted: Sat, 8th Oct 2005 22:04    Post subject:
I bought it.


Back to top
medeirosm




Posts: 289
Location: Canada
PostPosted: Sat, 8th Oct 2005 22:43    Post subject:
Sweet, if you are on the PP and send it back to a defenceman to one-time a shot on net you'll notice one of your forwards will head toward the net to redirect it.

The fact that you can do a one-timer slapshot in this version is enough to make me weep with joy, they make awesome replays when you score with one.
Back to top
crossmr




Posts: 2966
Location: United Kingdom
PostPosted: Wed, 14th Dec 2005 20:25    Post subject:
I must say initially I'm unimpressed with this. I've had it for awhile and just got into it. On easy, I destroy a team like 15 to 4....
up it to medium, and I get blown away by at least the same amount..thats hardly appropriate difficulty ramping.

What happened to games that would even begin to resemble a real hockey game? is it that hard to create? 111 shots a game, 250 body checks..never even close...


intel ultra 7 265k, 64gb ram, 3070
Back to top
Page 7 of 8 All times are GMT + 1 Hour
NFOHump.com Forum Index - PC Games Arena Goto page Previous  1, 2, 3, 4, 5, 6, 7, 8  Next
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group