Page 1 of 2 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
Posted: Thu, 14th May 2009 16:37 Post subject: [XBOX360] The iXtreme 1.6-thread |
|
 |
The official release date is set for May 14th, 2009.
Features will include:
-Strict Wave 3 compliance! hybrid (modified disks) will not boot!
-Strict drive speed compliance - 12x only for game discs!
-Support for SS V2!
-Integrated 0800 for game dumping including SS v2!
-Full support for all known game exceptions! eg ddr etc!
-One shot boot mode! - allows a one off boot of gamedisc without -stealth/partition checks (will still use stealth), use activate.iso disk -to activate each time!
-Support for easy drive key/version info cmd, same as liteon!
-Strict stealth/wave checking, one shot boot mode will boot wave(x)!
So, as soon as it comes out, someone post, okay?
Also, would be fun to hear from anyone who has updated their iX-firmwares to this, when it's out.
Watercooled 5950X | AORUS Master X570 | Asus RTX 3090 TUF Gaming OC | 64Gb RAM | 1Tb 970 Evo Plus + 2Tb 660p | etc etc
|
|
Back to top |
|
 |
nouseforaname
Über-VIP Member
Posts: 21306
Location: Toronto, Canada
|
Posted: Thu, 14th May 2009 17:05 Post subject: |
|
 |
so no real point to upgrade from 1.5.1?
asus z170-A || core i5-6600K || geforce gtx 970 4gb || 16gb ddr4 ram || win10 || 1080p led samsung 27"
|
|
Back to top |
|
 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
Posted: Thu, 14th May 2009 17:07 Post subject: |
|
 |
|
|
Back to top |
|
 |
nouseforaname
Über-VIP Member
Posts: 21306
Location: Toronto, Canada
|
|
Back to top |
|
 |
grimmmy
Posts: 1014
Location: London
|
Posted: Thu, 14th May 2009 17:14 Post subject: |
|
 |
Can i ask a really stupid question?
This "one shot" boot. Whats the purpose of it? I know it runs without partitian checks but I was wondering what to use it for.
I'm waiting on Hitachi releases therefore god only knows when they'll be released. Last I heard was perhaps the end of the month.
Intel Core i7-4790K 4.00GHz - 32GB Kingston HyperX - Gigabyte Z97X-Gaming 7 - EVGA GTX 980 TI SC 6GB - Asus ROG Swift PG278Q
|
|
Back to top |
|
 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
Posted: Thu, 14th May 2009 17:29 Post subject: |
|
 |
You can use it to boot non-stealth backups, or backups that would normally run only on early version firmwares.
Watercooled 5950X | AORUS Master X570 | Asus RTX 3090 TUF Gaming OC | 64Gb RAM | 1Tb 970 Evo Plus + 2Tb 660p | etc etc
|
|
Back to top |
|
 |
grimmmy
Posts: 1014
Location: London
|
Posted: Thu, 14th May 2009 17:54 Post subject: |
|
 |
ah, now that is a good feature.
Thank you
Intel Core i7-4790K 4.00GHz - 32GB Kingston HyperX - Gigabyte Z97X-Gaming 7 - EVGA GTX 980 TI SC 6GB - Asus ROG Swift PG278Q
|
|
Back to top |
|
 |
|
Posted: Thu, 14th May 2009 18:11 Post subject: |
|
 |
No point in updating and staying with 1.51 will actually be better in the long run for people who hate updating often. Just run the game through abgx before burning and you are fine. Over the top noob protection in ixtreme firmwares was the main reason why wave3 was such a big issue.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Weedo
Posts: 1506
Location: Japan
|
Posted: Fri, 15th May 2009 13:50 Post subject: |
|
 |
I think I will stay with 1.41 as long as it's possible to patch the new games. There's really no reason to upgrade if you don't use Live.
|
|
Back to top |
|
 |
|
Posted: Fri, 15th May 2009 19:58 Post subject: |
|
 |
It's out. Final changelog:
Code: | Team HyperX Presents IXtreme 1.6 firmware for Benq, Samsung and Liteon drives
------------------------------------------------------------------------------
IXtreme fw for Benq, Samsung and Liteon drives!
Features
--------
-Strict Wave 3 compliance! hybrid (modified disks) will not boot!
-Strict drive speed compliance - 12x only for game discs!
-Support for SS V2!
-Integrated 0800 for game dumping including SS v2!
-Full support for all known game exceptions! eg ddr etc!
-One shot boot mode! - allows a one off boot of gamedisc without -stealth/partition checks (will still use stealth), use activate.iso disk to activate each time!
-Support for easy drive key/version info cmd, same as liteon!
-Strict stealth/wave checking, one shot boot mode will boot wave(x)!
More Info
---------
Strict Wave 3 compliance means wave 3 games will only boot if they have correct PFI/DMI/SS and timestamp for wave 3
Strict drive speed compliance means games will only boot if drive is set for the initial speed of 12x, any modification of this make games fail to boot
SS v2 suports multiple timing samples for challenges type 5 and 7 , stroing them in the SS. This is a pre-requiste for SS v3 which has support for the so called AP2.5 check. Since this has never been used or may never be used by MS we will adopt a wait and see approach and continue to monitor for its usage.
With drive in Windows mode (Tray half open on powerup) 0800 mode is activated allowing easy dumping of game disc including SS v2. In this mode the drive is also able to output drive key, fw version and drive type by using a simple custom inquiry command.
Game exceptions are integrated in the fw for games that do not comply with the strict wave checks but are legitimate. These are Dance Dance Revolution Universe, Stoked, Ping 17 disk, afro samurai
One shot boot mode allows you to boot a Wave X or non stealth game by using the activate.iso disk as a flag. Just insert the activate disc and the next disc inserted will boot without any strict checks. This will still utilise full stealth if available. As soon as that disc is booted the flag is cleared, and you will have to re-insert the activate disk again to enable one shot boot. As always use with caution. |
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
Back to top |
|
 |
|
Posted: Fri, 15th May 2009 21:02 Post subject: |
|
 |
yeah but Liteon drivers are fuckzored wait for re-pack
can someone test if xbox1 games on dvd5 work as normal after the activate.iso
|
|
Back to top |
|
 |
|
Posted: Fri, 15th May 2009 21:37 Post subject: |
|
 |
So it seems no point in upgrading from 1.51?
11th "Thou shalt not flash"
|
|
Back to top |
|
 |
|
Posted: Fri, 15th May 2009 22:51 Post subject: |
|
 |
Correct ix 1.6 for liteon is now out.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
Back to top |
|
 |
deelix
PDIP Member
Posts: 32062
Location: Norway
|
Posted: Sat, 16th May 2009 01:23 Post subject: |
|
 |
lol, 1.6 is just making shit more strict to prevent people for not being banned.
|
|
Back to top |
|
 |
azzman
Posts: 4060
Location: Australiiiaaa , maate
|
Posted: Sat, 16th May 2009 04:12 Post subject: |
|
 |
|
|
Back to top |
|
 |
|
Posted: Sat, 16th May 2009 07:08 Post subject: |
|
 |
deelix wrote: | lol, 1.6 is just making shit more strict to prevent people for not being banned. |
Yes, 1.51 is actually better for long term.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
Back to top |
|
 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
|
Back to top |
|
 |
zozo6015
Posts: 190
Location: Where bad things have no limit
|
Posted: Mon, 18th May 2009 10:01 Post subject: |
|
 |
I just reflashed my Xbox 360 with iXtreme 1.6 using JF and dosflash and I tried some of the new 3rd wave games and everything works just perfectly.
I can say that it works better for me than the old iXtreme 1.4. The dvd's are read much faster and there are no hangings (for now) durring the gameplay as it was on the 1.4.
I haven't lost my mind. I know exactly where I left it.
|
|
Back to top |
|
 |
|
Posted: Mon, 18th May 2009 14:13 Post subject: |
|
 |
Do I still have to put the drive into Mode B to flash it from 1.4 to 1.6 or is there another waqy to do it?
Not sure my new X58 motherboard will do it. bah!
|
|
Back to top |
|
 |
zozo6015
Posts: 190
Location: Where bad things have no limit
|
Posted: Mon, 18th May 2009 14:15 Post subject: |
|
 |
Yes you have to put it in vendor mode. I used dosflash 32 to do that. I found a pretty good tutorial on 360mods.net Just follow the tutorial and everything will be fine.
I haven't lost my mind. I know exactly where I left it.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
armando99
Banned
Posts: 398
Location: i dont tell
|
Posted: Sat, 27th Jun 2009 17:12 Post subject: |
|
 |
so i heard...1.6 i just only for ripping ur own games? cuz i dont want to pay more money to upgrade to 1.6..i got 1.51 right now
|
|
Back to top |
|
 |
|
Posted: Sat, 27th Jun 2009 17:53 Post subject: |
|
 |
1.51 is fine, no need to upgrade if you got that.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
Back to top |
|
 |
armando99
Banned
Posts: 398
Location: i dont tell
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
grimmmy
Posts: 1014
Location: London
|
Posted: Tue, 30th Jun 2009 04:36 Post subject: |
|
 |
I'd plug the liteon in after windows has booted. Should still pick it up.
Intel Core i7-4790K 4.00GHz - 32GB Kingston HyperX - Gigabyte Z97X-Gaming 7 - EVGA GTX 980 TI SC 6GB - Asus ROG Swift PG278Q
|
|
Back to top |
|
 |
Page 1 of 2 |
All times are GMT + 1 Hour |