| Page 1 of 1 |
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
 Posted: Tue, 28th Apr 2009 16:54 Post subject: [XBOX360] iXtreme 1.4.1 easily upgraded to 1.5? |
|
 |
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 16:57 Post subject: |
|
|
The latest is 1.5.1 and in 2 weeks 1.6, why would you want outdated 1.5?
To reflash you don't need any special card. The best is to use onboard sata, ICH7, ICH9 are the best.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
Last edited by Glottis on Tue, 28th Apr 2009 16:59; edited 1 time in total
|
|
| Back to top |
|
|
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 17:14 Post subject: |
|
|
It's the same process, nothing changes. You just flash like you did it the first time.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 19:40 Post subject: |
|
|
I was on 1.41 with my Benq, yesterday I flashed to 1.51 with jungleflasher it's not the same as before much simpler, no booting to dos with usb you can do it all from windows the trickiest part was reading the god damn instructions, finally I found them on a forum. Also I had some trouble installing the poi32 driver, everything else was much easier than before, I won't rush with 1.6 at this rate I will rather wait for 1.7 or 1.8, opening the xbox and setting up my second comp with VIA is a bitch, I will wait until I buy the via sata card from ebay so I can flash it from this comp.
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 20:02 Post subject: |
|
|
You don't need VIA card for flashing, actually it's recommended to NOT use VIA with JungleFlasher.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
| Back to top |
|
|
nouseforaname
Über-VIP Member
Posts: 21306
Location: Toronto, Canada
|
| Posted: Tue, 28th Apr 2009 20:04 Post subject: |
|
|
jungleflasher doesn't work on vista x64 though...
asus z170-A || core i5-6600K || geforce gtx 970 4gb || 16gb ddr4 ram || win10 || 1080p led samsung 27"
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 20:05 Post subject: |
|
|
Yeah I read that somewhere but it worked and I can play Riddick, anyway it didn't work on my Intel for some reason it didn't recognize my xbox, maybe it requires a certain sata port I only have one sata free on this comp.
|
|
| Back to top |
|
|
_SiN_
Megatron
Posts: 12108
Location: Cybertron
|
| Posted: Tue, 28th Apr 2009 20:38 Post subject: |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 28th Apr 2009 21:00 Post subject: |
|
|
| _SiN_ wrote: | | nouseforaname wrote: | | jungleflasher doesn't work on vista x64 though... |
Luckily im on x86 
Thanks for the help guys, now it seems as if the actual opening of the 360 is the hardest part (seeing as i can do this with any SATA chipset?) 
Just connect the drive to the PC and use power from the Xbox. Easy enough, it seems |
Exactly, and btw, you don't need torx10 driver for opening if you don't have one, I used | shaped driver and opened successfully.
C2D E6750 @ 3.2Ghz, 4GB 800MHz DDR2 4-4-4-12, GeForce GTX 260 c216 OC 896MB, 3.2TB, Windows 7 Ultimate x64
Xbox 360 Elite, PS2 Slim, Xbox
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
grimmmy
Posts: 1014
Location: London
|
| Posted: Wed, 29th Apr 2009 02:23 Post subject: |
|
|
| madmax17 wrote: | | Yeah I read that somewhere but it worked and I can play Riddick, anyway it didn't work on my Intel for some reason it didn't recognize my xbox, maybe it requires a certain sata port I only have one sata free on this comp. |
You running a benq? I know the hitachi's need to be put into mode B before windows will see them (easiest way is to hook up via sata and use the slax boot disc).
Using jungleflasher you'll need your original keys for the xbox. There is an inbuilt tool that can recreate them in JF but it doesn't always work. Without the original keys, JF won't flash (again, case of hitachi. Not sure about all drives)
As for sata controllers, most nowadays seem to work. I've used intels and nvidia's to flash my drives.
Just make sure the xbox and PC are connected via a wire or something (anything that conducts. I use a metal ruler and some gaffer tape to hold it in place). Floating earths could potentially kill you xbox (or PC I guess).
|
|
| Back to top |
|
|
|
|
| Posted: Wed, 29th Apr 2009 09:21 Post subject: |
|
|
| grimmmy wrote: | | madmax17 wrote: | | Yeah I read that somewhere but it worked and I can play Riddick, anyway it didn't work on my Intel for some reason it didn't recognize my xbox, maybe it requires a certain sata port I only have one sata free on this comp. |
You running a benq? I know the hitachi's need to be put into mode B before windows will see them (easiest way is to hook up via sata and use the slax boot disc).
Using jungleflasher you'll need your original keys for the xbox. There is an inbuilt tool that can recreate them in JF but it doesn't always work. Without the original keys, JF won't flash (again, case of hitachi. Not sure about all drives)
As for sata controllers, most nowadays seem to work. I've used intels and nvidia's to flash my drives.
Just make sure the xbox and PC are connected via a wire or something (anything that conducts. I use a metal ruler and some gaffer tape to hold it in place). Floating earths could potentially kill you xbox (or PC I guess). |
Didn't quite understand the first paragraph but I will definitely try to flash with Intel next time (again), getting my second comp with via running is a drag. There is some mention of that 'half-tray opening' trick not sure what that's for I couldn't get the hang of it, you should open you xbox tray then pull the plug when it closes again half way.
Yes it is mentioned in the "how to flash for dummies guide" you should always 'ground' your xbox and pc by connecting them, I simply put the xbox on top of the pc so they are touching each other. |
|
| Back to top |
|
|
grimmmy
Posts: 1014
Location: London
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Wed, 29th Apr 2009 15:46 Post subject: |
|
|
Much simpler solution, install win xp or something in dual boot, only takes 45 minutes (with drivers and all) you will save time in the end as jungle is way faster then dos+usb+5 other programs.
|
|
| Back to top |
|
|
|
|
| Posted: Wed, 29th Apr 2009 15:53 Post subject: |
|
|
Will it work with VMware? I could just install XP on a virtual machine.
|
|
| Back to top |
|
|
|
|
| Posted: Wed, 29th Apr 2009 19:11 Post subject: |
|
|
Maybe I don't know about Virtual machine, I think it might work.
|
|
| Back to top |
|
|
|
|
| Posted: Wed, 29th Apr 2009 19:22 Post subject: |
|
|
Nope, does not work. I'll dualboot when 1.6 is released.
|
|
| Back to top |
|
|
nouseforaname
Über-VIP Member
Posts: 21306
Location: Toronto, Canada
|
|
| Back to top |
|
|
| Page 1 of 1 |
All times are GMT + 1 Hour |
like xbox1 on dvd5 YEAH!!!!
. Meh, I'll just wait for 1.6 and flash via DOS.
