i bought geforce 7600GT video card 3 months ago..
i sent it to where i bought it from 2 months ago because of a problem
now i got the video card back and it supposed to be fixed but i still have the problem..
so maybe u can help me..
when i turn on the computer so it's turned on but the monitor (CTR not LCD) is still turned off but the computer itself is running..
but if i put my old geforce 4 mx 440 so the monitor works fine
oh and when the monitor's cable is unplugged so it shows a message something with "signal" and when i plugging it to the 7600gt so the message is disappeared so the monitor detects the video card but it donesn't turned on...
first of all there is no link to your thread
did u tried connecting your monitor to DVI port via adaptor?
and what's your monitor minimum refresh rate?
did u tried other monitor?
and what sort of problem was before u send your card for repairs? if same they probably send your faulty card back
I guess your card is running at a too high refresh rate, set it lower instead of optimal. At bootup press F8 so you get the Windows boot menu and select VGA mode to do this.
Rinze- i can't get to the boot screen since there is no view at all..
i can't see anything..
or maybe u mean that i should do this with the old graphic card?
ELIZ- 1.you are the third guy that suggesting that option.. i will buy this next week..
2. i think it's 60 hertz
3. i've tried another computer, of course with another monitor.
when i first sent the card for repair there was no problem i just forgot to connect the molex connector so all the games were crashed after a few minutes of playing..
Signature/Avatar nuking: none (can be changed in your profile)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum
