| Page 30 of 59 |
JBeckman
VIP Member
Posts: 35051
Location: Sweden
|
 Posted: Mon, 28th Mar 2016 16:14 Post subject: |
|
 |
Announcement http://www.geforce.com/whats-new/articles/game-ready-drivers-for-virtual-reality-dark-souls-iii-and-more-released
Download http://www.nvidia.com/download/driverResults.aspx/100868/en-us
( From http://forums.guru3d.com/showthread.php?t=406665 )
364.72
PDF release notes:
http://us.download.nvidia.com/Windows/364.72/364.72-win10-win8-win7-winvista-desktop-release-notes.pdf
Dark Souls 3 SLI profile added.
Win 10 fixes:
[364.54] System hang or BSOD on express installation of 364.54 driver over 364.51 driver with single HDMI monitor connected. [200181626]
[Razer Dock] Hot unplug then plug causes “Display driver has stopped responding and has recovered” notification. [200172155]
[SLI, Tom Clancy's The Division] Frequent freezes and pauses as well as low GPU usage result in low FPS. [1744361]
[364.51, SLI] BSOD when SLI enabled on 364.51 or 364.47. [1739730]
[364.51, SLI] In a multi-monitor configuration with one G-SYNC monitor and one non-G-SYNC monitor, the FPS in games drops to single digits if Chrome hardware acceleration is enabled and V-SYNC is off. [1719037]
Win 8/7/Vista fixes.
[SLI, Tom Clancy's The Division] Frequent freezes and pauses as well as low GPU usage result in low FPS. [1744361]
[359.00] PowerDirector crashes in nvspcap64.dll. [1708900]
Win 10 known issues:
[SLI, Street Fighter V] Performance drop (pause and play) observed when the game is played at 4K resolution with SLI enabled. [200172046]
StarWars TOR- Knights of the Fallen Empire hangs when in-game graphics settings changed in full-screen mode. [200169614]
[SLI] Blank display is observed on disabling SLI with two displays connected. [200168702]
[SLI] Unable to select the check box of an HDMI display to extend it via the NVIDIA Control Panel. [200163629]
[Luxmark 3.0, Windows 10 TH2] Display driver stopped responding while running benchmark LuxBall HDR (Simple Bechmark:217K triangles). [200153736]
Driver installation will fail if GeForce Experience is a selected component and the system is either in safe mode or without a network connection. [200151914]
[347.09, GM204] Blank screen observed on an ASUS Tiled display when system resumes from shutdown or hibernation with Fast boot option enabled from BIOS. [1591053]
[SLI, UEFI] Event Viewer error 14 points to nvlddmkm when the system is rebooted. [1309257]
Now in the correct place. 
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
JBeckman
VIP Member
Posts: 35051
Location: Sweden
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Mon, 28th Mar 2016 22:50 Post subject: |
|
|
did you mean to post that on guru3d? 
no issues here, like always 
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 29th Mar 2016 06:30 Post subject: |
|
|
I hope these fixes those annoying split second black screen flashes, those unwelcome crap came with gaem redi division drivers.
|
|
| Back to top |
|
|
ragnarus
Posts: 686
Location: Somewhere in Warsaw Pact
|
| Posted: Tue, 29th Mar 2016 09:10 Post subject: |
|
|
| Bob Barnsen wrote: | | Try an older driver. Compared to the latest drivers, i had no problems with the old 359.06. |
I didnt have high hopes for older drivers to solve it but I decided to try few versions out and I decided to try those 359.06 you mentioned first and... clocks works on them perfectly even after sleep mode.
The fuck is nvidia on doing all this time, fixing sli stuff when something as simple as clocks cycles is bugged for a 660 ti that I think is still pretty damn popular card. Seriously nvidia is so proud of themselves for their drivers but they are a bugfest.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 29th Mar 2016 09:57 Post subject: |
|
|
last week several people were "you shouldn't do that, why would you want your card to work on default speed all the time.." when I recommended that same thing 
| Lutzifer wrote: | | and yes, mine is only average |
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Tue, 29th Mar 2016 11:14 Post subject: |
|
|
you don't need to OC your hardware either...
| Lutzifer wrote: | | and yes, mine is only average |
|
|
| Back to top |
|
|
Cyb3r
Posts: 615
Location: USA
|
| Posted: Tue, 29th Mar 2016 19:31 Post subject: |
|
|
new driver still has issues with sli and a few off the fixes aren't apparently working either /sigh nvidia
Case: Nanoxia Deep Silence 6 (Black) | MB: Msi X99A Gaming 9 | CPU: i7 5960x
CPU Cooling(temp): Corsair 110i Gtx | PSU: Evga Supernova 1000w | GPU: Gigabyte G1 Gaming 980ti 6gb | RAM: 16gb Ripjaws 4 3200mhz | Screen: Asus MG279Q / LG 23" Ips
|
|
| Back to top |
|
|
JBeckman
VIP Member
Posts: 35051
Location: Sweden
|
| Posted: Sat, 9th Apr 2016 13:40 Post subject: |
|
|
|
|
|
| Back to top |
|
|
JBeckman
VIP Member
Posts: 35051
Location: Sweden
|
| Posted: Thu, 14th Apr 2016 19:31 Post subject: |
|
|
|
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
JBeckman
VIP Member
Posts: 35051
Location: Sweden
|
| Posted: Thu, 14th Apr 2016 22:02 Post subject: |
|
|
These are also said to fix a power-state issue with energy saving causing lower than intended performance in some games on certain GPU's going by the Guru3D forum topic, also uses a older Vulkan runtime for some reason (It's a separate sub-branch of the 364.xx series apparently so it probably didn't have the newest version of Vulkan merged into it before release.) but that shouldn't make any real difference outside of the Vulkan SDK itself.
EDIT: But yeah it might take a new main branch for some of the issues with the 360 series to be fully fixed, 365.xx can't be too far off if they are already at .96 now, though I suppose if it needs to they can go above .99 and the actual driver branch used could be lower than the release number the driver has.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 00:38 Post subject: |
|
|
been running shadowplay's shadow recording lately. amazing tech. 0 performance impact for 5 minute instant recording clips.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 01:00 Post subject: |
|
|
Running the 364.91 Vulkan set since release, good driver set. One of the best in quite a while.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 15:08 Post subject: |
|
|
| Drowning_witch wrote: | | been running shadowplay's shadow recording lately. amazing tech. 0 performance impact for 5 minute instant recording clips. |
you can pick how long to snap shot now? I thought it was default to the last 20 mins or something, I don't use it as I don't want that shit can of doom called experience installed. Or have they given us better options for that shit these days. |
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 15:10 Post subject: |
|
|
you could set it to 1-20min since a very long time ago
| Lutzifer wrote: | | and yes, mine is only average |
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 16:34 Post subject: |
|
|
| moosenoodles wrote: | | Drowning_witch wrote: | | been running shadowplay's shadow recording lately. amazing tech. 0 performance impact for 5 minute instant recording clips. |
you can pick how long to snap shot now? I thought it was default to the last 20 mins or something, I don't use it as I don't want that shit can of doom called experience installed. Or have they given us better options for that shit these days. |
5 is the default now, but yes, you can pick within a certain range.
Yeah, I don't use anything in experience other than shadowplay. some games take 0 hit with shadow recording. dying light literally 0 impact. on the other hand, u3 engine games tend to increase gpu usage by aroun 10% with shadow recording.
geforce experience itself, with shadowplay disabled though, no resource usage.
I simply use my regular method of unzip the driver and installing just driver+phsyx and then I install GFE separately.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 17:40 Post subject: |
|
|
why do you do the GFE seperate witch? what is the purpose of unticking it then re running the installer later? What I would like is no GFE but shadowplay install seperate. I guess they are linked in someway though, I also install phyx and driver only. But always wanted to check out shadowplay, unfortunately I do not want GFE to fuck with profiles.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 19:32 Post subject: |
|
|
I don't know which entries to delete from the installer to have GFE still work so I do it this way. I don't untick GFE, I simply delete all the folders before even runing setup, to prevent useless backend services from being installed. Even if you just select driver+phsyx, it will install the backend stuff.
But yeah, shadowplay is a part of GFE because they know it's the only way to get the majority to install it.
It doesn't mess with your profiles unless you let it though. on first run you can disable that crap before it makes any changes. I just turn it all off, and toggle shadowplay on/off as I need it.
|
|
| Back to top |
|
|
|
|
| Posted: Fri, 15th Apr 2016 21:02 Post subject: |
|
|
what backend stuff is installed still when only installing drivers and phyx? :O never thought it would do that but that is annoying. When I update shortly again I will try all this out.
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 16th Apr 2016 04:10 Post subject: |
|
|
| Drowning_witch wrote: | Even if you just select driver+phsyx, it will install the backend stuff.
|
No it will not, as long as you extract driver package, and delete said files beforehand 
First thing I do with every Nvidia update.
This is what you want...
NVI2 is needed for setup purposes, graphics during install, tick boxes etc, else it will fail.
Lets look at bloat...
The backend stuff is located in 'Update.Core' folder, and if you don't remove, then it gets installed, regardless of what you choose upon installation.
You still take big chances installing the GBloat Experience, and/or ShadowBloat though, as they require 'hidden' nasties to be installed with them, most probably 'backend'.
Little wonder these driver sets have swelled to near 400 Mb download, and 900Mb extracted!
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 16th Apr 2016 09:17 Post subject: ***** |
|
|
*****
Last edited by Areius on Fri, 19th Sep 2025 16:23; edited 1 time in total
|
|
| Back to top |
|
|
|
|
| Posted: Sat, 16th Apr 2016 12:51 Post subject: |
|
|
| scaramonga wrote: | | Drowning_witch wrote: | Even if you just select driver+phsyx, it will install the backend stuff.
|
No it will not, as long as you extract driver package, and delete said files beforehand
|
Yeah, I meant in the official untouched installer. it will install backend stuff even if you select the driver+phsyx only in the installer, not if you clean up the installer before running setup.
That's what moose was asking about. why am I doing a manual install instead of just ticking features on/off it in the installer.
but yes, installing GFE afterwards will install backend service again, but at least just the bare minimum for running GFE. Didn't experiment with the GFE installer to see if it can be bypassed.
this is the memory footprint I get doing the manual driver+phsyx and then GFE install with shadowplay turned on. without GFE, only the last 3 entries would remain, and even those can be disabled by setting nvidia helper service to manual, so those 3 would start only when you open Nvidia cpanel.
without tweaking anything, it's 50mb of RAM, I can deal with that for the awesome shadowplay feature.
|
|
| Back to top |
|
|
| Page 30 of 59 |
All times are GMT + 1 Hour |
did they bought amd already and got amd people working there now?
)
