Daemon-tools V4
Page 17 of 24 Goto page Previous  1, 2, 3 ... 16, 17, 18 ... 22, 23, 24  Next
nachog4




Posts: 20

PostPosted: Tue, 15th Nov 2005 04:44    Post subject:
jaja...studyng right now, i ll do it tomorrow....but im sure there is a lot of plp with q4 still on their hdd....come on ..test!!!

didnt understand about the remaining blacklisting of the scsi drive, maybe its only my level of english Razz, i had no problem running securom7 with only dt4

pd.looks like dt4 is just a copy and paste all in one of sfcure,sr7.stop and sd4hide...they forgot tages Laughing
Back to top
Drvre




Posts: 156

PostPosted: Tue, 15th Nov 2005 04:57    Post subject:
Make sure your real drives are visible when you test SecuROM7, 'cause if you've used SFNightmare before you should enable CD,node and CH2 or whatever you've disabled before. I've tested it with Heroes of the Pacific (SecuROM 7.00.00.0022) and it's the only way it works.
To be more precise, DT4 is not recognized as an emulation software, still the blacklisting of the SCSI drive exists 'cause SCSI drives are blacklisted in these protections no matter if they are real or not. So, if you were to have a rom on an addon PCI ATA RAID card, you wouldn't be able to use it even with an original disc since the protection doesn't allow the game to run from any SCSI drive.
Back to top
$ilent$uicide




Posts: 252

PostPosted: Tue, 15th Nov 2005 05:51    Post subject:
Ok so basically now you can throw out sd4hide, SR7.STOP, SFcure... DT4 manages to get around these. As for the other SF titles i never did get SCCT to run EVER, not even with DT4. As for the other SF titles they still run like they did before (minus having to use SFcure). So in a nut shell this is not what i expected form DT4 after those kook developers in the DT forums swore up and down that basic DT4 would handle Sf and Tages like a charm.... bah BS.

DT4 is just an updated 3.47, hell it should have been called 3.48 (looks exactely the same) from earlier screen shots i thought DT4 was supposed to have different colored voodoo masks and shit, kinda looked real cool. What happened?

It would be easy to say the real DT4 is still comming, in the guise of a program called DTPro and costing you $15-20 or whatever the fuck they want for it. But to cheat the average user by not (properly fixing) Sf games feels like weve been fucked over bigtime, everybody has waited sooo looong, and what for? Just to see SD4 and SR7 fixed? Dont get me wrong im happy to see some things fixed but sheesh why go half-way when you could have grabbed the world by the balls! Dissapointing!

I agree, DTPro will be warez'd like a mofo just because alot of people really feel fucked right now with nothing more then a lame DT3.48 *update*. Rolling Eyes


Windows 7|Enermax1100w|ASUS Rampage III X58|Core i7 990X@ 4.5G|DDR3 3X 2 Mushkin @ 1850mhz |A-Data 256mb SSD|Asus 16X dvd |Nvidia 580XT|Dell Ultrasharp 2405 24" LCD|Creative X-Fi|Logitec Z-680
Back to top
nightlith




Posts: 744
Location: Land of Bagged Milk
PostPosted: Tue, 15th Nov 2005 06:02    Post subject:
haha throw out SD4hide? BS.

I just tried my Civ4 clone. Nothing gets it to work in pure DT4 mode. I tried unplugging drives, tried emulation, RPMS, no emulation, whatever. The only way to get it to run was SD4Hide. As usual. WTF is the point? It looks identical to 3.47 and behaves just like 3.47.


i can has computar?!
Back to top
Drvre




Posts: 156

PostPosted: Tue, 15th Nov 2005 06:08    Post subject:
Well, I'm not even dignify this software with a leech, I'll go and buy myself another PCI ATA RAID card, one that supports optical drives, as opposed to my current, put my roms on that and stop disconnecting them whenever I want to play games like GT Legends and WorldRacing2. These kind of cards cost about 20$ tops, and I'm not talking about those superduper Adaptecs, just a shitty Inno or STLab will do.

$ilent$uicide : if you are trying to make the 4.18 GB mdf to work, then you'll never see it running. You need the par_Snake release, which is 4.15GB, and the LeatherFace .mds. It works like a charm, even updated to 1.05.
Back to top
Game90




Posts: 231

PostPosted: Tue, 15th Nov 2005 06:08    Post subject:
the point is, they promised to release DT4 with all the godly functions but they failed to code it in time. so what they did was to release a updated version of 3.47. the functions we are all waiting for will come with DT Pro v1.00 that wont be ready anytime soon.

probably one or two months more.


TheBugulous wrote:
There is only 1 Mega Awesome title coming & that is Chris Taylor's latest opus ... <drum roll>
S U P R E M E C O M M A N D E R !!!!!!!!!!!!!
Back to top
Who-CareZ




Posts: 676

PostPosted: Tue, 15th Nov 2005 06:13    Post subject:
Ok so what you guys are saying is, I should not even bother to intsall this. And keep DT3 instead.

I really dont have a problem running SR7 Stop or Virtual CD hide from my desktop to run some games.

So I guess im not going to even install this. Whats the point?

Wow huge letdown. Why even release it if they knew they were going to piss off alot of people. And it seems like a shit load of people are pissed off. Which is bad for them, because people will now just say fuck it, and warez the Pro version.
Back to top
nightlith




Posts: 744
Location: Land of Bagged Milk
PostPosted: Tue, 15th Nov 2005 06:20    Post subject:
wait fuck. Talk about PEBCAK. Ignore the ranting of this idiot. Seems in my haste to get everything to work I failed to mount the proper image. Both clones of The Movies and Civ4 work. This is with an unplugged IDE. BIOS disabling didn't help as windows was still showing the IDE rom.

So SD4Hide is no longer needed. NEed to find a SR7 game somehwere to try that....

And I still refuse to install StarForceYourSystemToCrash.


i can has computar?!
Back to top
$ilent$uicide




Posts: 252

PostPosted: Tue, 15th Nov 2005 06:31    Post subject:
nightlith wrote:
wait fuck. Talk about PEBCAK. Ignore the ranting of this idiot. Seems in my haste to get everything to work I failed to mount the proper image. Both clones of The Movies and Civ4 work. This is with an unplugged IDE. BIOS disabling didn't help as windows was still showing the IDE rom.

So SD4Hide is no longer needed. NEed to find a SR7 game somehwere to try that....

And I still refuse to install StarForceYourSystemToCrash.


Ok i am confused now i needed SFN to run path of neo as DT4 couldent do it by itself, 'security module needed blah blah' with just DT4 but when i hide everything using SFN then it started up just fine. Same problem with total overdose, DT4 alone would not start the game "insert correct cdin the rom drive blah blah" but when coupled with SFN it worked just fine, screwey thing is with path of neo and total ovedose there both SR7 games. When i tried to run SR7.HIDE it just said that there is nothing to hide which makes sence seeing that DT4 is no longer black listed. But still....... using SFN to run SR7 games.... hmm ....


Windows 7|Enermax1100w|ASUS Rampage III X58|Core i7 990X@ 4.5G|DDR3 3X 2 Mushkin @ 1850mhz |A-Data 256mb SSD|Asus 16X dvd |Nvidia 580XT|Dell Ultrasharp 2405 24" LCD|Creative X-Fi|Logitec Z-680


Last edited by $ilent$uicide on Tue, 15th Nov 2005 06:32; edited 1 time in total
Back to top
sexyjesus
VIP Member



Posts: 5803

PostPosted: Tue, 15th Nov 2005 06:32    Post subject:
$ilent$uicide wrote:
Sf games feels like weve been fucked over bigtime, everybody has waited sooo looong, and what for? Just to see SD4 and SR7 fixed? Dont get me wrong im happy to see some things fixed but sheesh why go half-way when you could have grabbed the world by the balls! Dissapointing!

I agree, DTPro will be warez'd like a mofo just because alot of people really feel fucked right now with nothing more then a lame DT3.48 *update*. Rolling Eyes


Complaining about your free software again? You a contributing mofo to the scene or are you just bustin' wind?
Back to top
Drvre




Posts: 156

PostPosted: Tue, 15th Nov 2005 06:50    Post subject:
sexyjesus wrote:
$ilent$uicide wrote:
Sf games feels like weve been fucked over bigtime, everybody has waited sooo looong, and what for? Just to see SD4 and SR7 fixed? Dont get me wrong im happy to see some things fixed but sheesh why go half-way when you could have grabbed the world by the balls! Dissapointing!

I agree, DTPro will be warez'd like a mofo just because alot of people really feel fucked right now with nothing more then a lame DT3.48 *update*. Rolling Eyes


Complaining about your free software again? You a contributing mofo to the scene or are you just bustin' wind?


Well, keeping in mind that complaining about free software is strictly forbidden in here, there will be no more post like "the game sucked monkey balls IMO", no? That would be complaining about free software, and we cannot have that here. Oh, unless that person bought the game, which he obviously did, nobody here even touches warez.
Back to top
davidmi58




Posts: 43

PostPosted: Tue, 15th Nov 2005 07:04    Post subject:
My X3/DT 4 chronicles:

This game works for me with DT3.47, SASFB.exe and sfnightmare, disabled node, cd, etc. with opticals plugged in. I don't like to run it this way this because twice, I have had my system crash with this setup and had to flash my bios to get the system up again. Other than that, it works fine. So here goes my attempt with DT4

Uninstalled DT3.47. Installed 4.0. Mounted X3. Tried to run...crash/reboot.

Unplugged opticals, mounted x3, ran sfnightmare, disabled node, cd, etc. Tried to run...crash/reboot.

Replugged opticals, mounted x3, ran SASFB.exe, ran sfnightmare, disabled node, cd, etc. (This was how I got X3 to run with DT3.47) Tried to run...crash/reboot.

Uninstalled DT4, reinstalled DT 3.47, Replugged opticals, mounted x3, ran SASFB.exe, ran sfnightmare, disabled node, cd, etc. It works again.

Is there something I am missing here?
Back to top
nightlith




Posts: 744
Location: Land of Bagged Milk
PostPosted: Tue, 15th Nov 2005 07:14    Post subject:
Yah, you're trying to play X3. I'd say you've lost your mind Get a game that doesn't require a fucking mainframe just to display the main menu. lol Wink

(/sarcasm, jeezus)


i can has computar?!
Back to top
tarras




Posts: 19

PostPosted: Tue, 15th Nov 2005 07:53    Post subject:
Ok, DT4 worked for me with Croos Rasing Championship!

Ran this way
1. Game was installed previously with SFCure
2. I DIDN`T unplugged DVD-Drive
3. Disabled all virtual drives in Alcohol
4. Mounted image with DT4
5. Starforce Nightmare - disabled Node, CD, Ch1, Ch2
6. GAME WORKS!


IMHO - Try to do something like this if game where installed with sfcure. If you need to inmstall new game - try to do 1-5 steps before installing. Dont have much time now for experiments Sad


Gitara, ognisko - tu leją się po pyskach
Słońce, jezioro - ich trzech, ale nas czworo
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 08:20    Post subject:
ok, now i have tested every starforce game: without physical drives plugged i run EVERY SINGLE GAME just mounted with dtools4. end of the story. is way simpler than sfcure
Back to top
IcedFreon




Posts: 1035
Location: THE PILLOW FORT OF ISOLATION
PostPosted: Tue, 15th Nov 2005 08:48    Post subject:
bullshit. you're not runnign any SF 3.5 or 3.6 game without unpluggin. stop spreading lies.


Last edited by IcedFreon on Tue, 15th Nov 2005 09:50; edited 4 times in total
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 08:55    Post subject:
IcedFreon wrote:
bullshit. you're not runnign any SF 3.5 or 3.6 game without unpluggin. stop spreading lies.


READ.. without drived plugged means "with drives unplugged"
Back to top
croncas




Posts: 1

PostPosted: Tue, 15th Nov 2005 08:57    Post subject:
Selt: did you try X3 with just dt4 and unplugged drives ?
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 08:59    Post subject:
my "every single game" sentence includes x3 reunion, sure
Back to top
octo




Posts: 29

PostPosted: Tue, 15th Nov 2005 09:12    Post subject:
How 2 Run King Kong with DT4 ?? some one can help >>???




----- > l33t Gamer
Back to top
tarras




Posts: 19

PostPosted: Tue, 15th Nov 2005 09:12    Post subject:
IcedFreon, just read what i wrote before - I RAN Cross Racing Championship WITHOUT unplugging DVR-RW! Just disabled Node, CD, Ch1, Ch2 in starforce nightmare.

BUT I'm not sure if it works with other protected by SF games. Just try my way.


Gitara, ognisko - tu leją się po pyskach
Słońce, jezioro - ich trzech, ale nas czworo
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 09:14    Post subject:
crc is 3.4 so u can play it simply disabling drives with sfnightmare.
Back to top
IcedFreon




Posts: 1035
Location: THE PILLOW FORT OF ISOLATION
PostPosted: Tue, 15th Nov 2005 09:51    Post subject:
Selt wrote:
IcedFreon wrote:
bullshit. you're not runnign any SF 3.5 or 3.6 game without unpluggin. stop spreading lies.


READ.. without drived plugged means "with drives unplugged"


hah yea im blind. but big deal. we could do that before DT4 so meh.
and hows it simpler than sfcure????? with sfcure all you had to do was hit start.bat. OR have it running soon as you boot.... lol so hows going into a prog and mounting then playing simpler than having a prog already running on yer comp when u boot it up? please explain.
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 09:52    Post subject:
IcedFreon wrote:
Selt wrote:
IcedFreon wrote:
bullshit. you're not runnign any SF 3.5 or 3.6 game without unpluggin. stop spreading lies.


READ.. without drived plugged means "with drives unplugged"


hah yea im blind. but big deal. we could do that before DT4 so meh.
and hows it simpler than sfcure????? with sfcure all you had to do was hit start.bat. OR have it running soon as you boot.... lol so hows going into a prog and mounting then playing simpler than having a prog already running on yer comp when u boot it up? please explain.


1st, sfcure was for service pack 2 only.
2nd sfcure was "unplug physically your drives, mount game, click 5 buttonts, play" now is "unplug physically your drives, mount game, play"
Back to top
IcedFreon




Posts: 1035
Location: THE PILLOW FORT OF ISOLATION
PostPosted: Tue, 15th Nov 2005 09:53    Post subject:
octo wrote:
How 2 Run King Kong with DT4 ?? some one can help >>???


unplug your opticals and mount it. the exact same way we ran it in alcohol and the previous DT, since DT does nothgin against sf 3.5 and 3.6. pretty much making having DT4 pointless
Back to top
IcedFreon




Posts: 1035
Location: THE PILLOW FORT OF ISOLATION
PostPosted: Tue, 15th Nov 2005 09:56    Post subject:
Selt wrote:
IcedFreon wrote:
Selt wrote:


READ.. without drived plugged means "with drives unplugged"


hah yea im blind. but big deal. we could do that before DT4 so meh.
and hows it simpler than sfcure????? with sfcure all you had to do was hit start.bat. OR have it running soon as you boot.... lol so hows going into a prog and mounting then playing simpler than having a prog already running on yer comp when u boot it up? please explain.


1st, sfcure was for service pack 2 only.
2nd sfcure was "unplug physically your drives, mount game, click 5 buttonts, play" now is "unplug physically your drives, mount game, play"


um sfcure was ONE button. the start.bat. or simply have it running when you boot, which makes it ZERO buttons. Dont know what retarded elongated version you got.


Last edited by IcedFreon on Tue, 15th Nov 2005 10:00; edited 1 time in total
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 09:57    Post subject:
IcedFreon wrote:
octo wrote:
How 2 Run King Kong with DT4 ?? some one can help >>???


unplug your opticals and mount it. the exact same way we ran it in alcohol and the previous DT, since DT does nothgin against sf 3.5 and 3.6. pretty much making having DT4 pointless


it's not daemon fault if scsi drives have been recently hammered down by all protections. ide virtual drive will satisfy you more than dtools4, guaranteed
Back to top
IcedFreon




Posts: 1035
Location: THE PILLOW FORT OF ISOLATION
PostPosted: Tue, 15th Nov 2005 09:58    Post subject:
Selt wrote:
IcedFreon wrote:
octo wrote:
How 2 Run King Kong with DT4 ?? some one can help >>???


unplug your opticals and mount it. the exact same way we ran it in alcohol and the previous DT, since DT does nothgin against sf 3.5 and 3.6. pretty much making having DT4 pointless


it's not daemon fault if scsi drives have been recently hammered down by all protections. ide virtual drive will satisfy you more than dtools4, guaranteed


id say its thier fault for saying Dt4 will do somethign that it doesnt. so if DTPro ever comes out and it doesnt block Sfthen what? lol they gonna say oh wait for DTPro v2 or v3 or v4 etc?
Back to top
Selt




Posts: 1493

PostPosted: Tue, 15th Nov 2005 10:00    Post subject:
IcedFreon wrote:
Selt wrote:
IcedFreon wrote:


unplug your opticals and mount it. the exact same way we ran it in alcohol and the previous DT, since DT does nothgin against sf 3.5 and 3.6. pretty much making having DT4 pointless


it's not daemon fault if scsi drives have been recently hammered down by all protections. ide virtual drive will satisfy you more than dtools4, guaranteed


id say its thier fault for saying Dt4 will do somethign that it doesnt. so if DTPro ever comes out and it doesnt block Sfthen what? lol they gonna say oh wait for DTPro v2 or v3 or v4 etc?


there's nothing to block. the only dtoolsv4 fault is that it's still a scsi drive. probably you haven't catch that protections have fucked also real scsi drives to avoid the use of daemon tools.
they cant fuck real ide drives when dtools will be ide. u'll see
Back to top
Drvre




Posts: 156

PostPosted: Tue, 15th Nov 2005 10:04    Post subject:
IcedFreon wrote:
Selt wrote:
IcedFreon wrote:


hah yea im blind. but big deal. we could do that before DT4 so meh.
and hows it simpler than sfcure????? with sfcure all you had to do was hit start.bat. OR have it running soon as you boot.... lol so hows going into a prog and mounting then playing simpler than having a prog already running on yer comp when u boot it up? please explain.


1st, sfcure was for service pack 2 only.
2nd sfcure was "unplug physically your drives, mount game, click 5 buttonts, play" now is "unplug physically your drives, mount game, play"


um sfcure was ONE button. the start.bat. or simply have it running when you boot. dont know what retarded elongated version you got.


Well, i'm screaming from the top of my lungs here that SFCure can be made an automated process, you don't have to start it, you don't have to stop it, and nobody seems to read this. Don't bother IcedFreon, looks like nobody's reading. Let them do their imaginary 100 steps and dances before running SF games, or better, use the superdupertrendycoolstateoftheartprotectionbuster software there is :the DT4...ROFL
Back to top
Page 17 of 24 All times are GMT + 1 Hour
NFOHump.com Forum Index - Protection Bitch'n Goto page Previous  1, 2, 3 ... 16, 17, 18 ... 22, 23, 24  Next
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group