Ok i have the above PSU,and i want to know if the temp that its runing is ok.
when i touch the back of the case (psu where the fan is..its pretty hot)
checked the temp In Sisoft Sandra .. and that what it said:
(look at the temperature section...its says 60C Aux PSU..is that ok?)
SiSoftware Sandra
Mainboard
Manufacturer : Gigabyte Technology Co., Ltd.
MP Support : 1 Processor(s)
MPS Version : 1.40
Model : 7VT600-P-RZ
Version : x.x
System BIOS : 10/01/2004-KT600-8237-6A6LYG02C-00
Chipset : VIA KT400/A, KT600
System Memory Controller
Location : Mainboard
Error Correction Capability : None
Number of Memory Slots : 3
Maximum Installable Memory : 768MB
Bank0/1 - A0 : DIMM 256MB/64 @ 400Mt/s
Bank2/3 - A1 : DIMM 256MB/64 @ 266Mt/s
Bank4/5 - ֳֻh : DIMM 32MB/64 @ 266Mt/s
Chipset 1
Model : Giga-Byte Technology VT8377 Apollo KT400/A/600 CPU to PCI Bridge
Bus(es) : AGP PCI IMB USB i2c/SMBus
Front Side Bus Speed : 2x 167MHz (334MHz data rate)
Maximum FSB Speed / Max Memory Speed : 2x 200MHz / 2x 200MHz
Width : 64-bit
IO Queue Depth : 4 request(s)
Chipset 1 Hub Interface
Type : V-Link
In/Out Width : 4-bit / 4-bit
Multiplier : 2/1x
Speed : 8x 66MHz (528MHz data rate)
IO Queue Depth : 9 request(s)
Logical/Chipset 1 Memory Banks
Bank 0 : 256MB DDR-SDRAM 2.5-3-2-6 2CMD
Bank 2 : 256MB DDR-SDRAM 2.5-3-2-6 2CMD
Bank 4 : 256MB DDR-SDRAM 2.5-3-2-6 2CMD
Bank Interleave : 4-way
Speed : 2x 133MHz (266MHz data rate)
Multiplier : 4/5x
Width : 64-bit
Power Save Mode : No
Fixed Hole Present : No
APIC 1
Version : 0.03
Speed : 16MHz
Multiplier : 1/2x
Maximum Interrupts : 24
IRQ Handler Engaged : Yes
Enhanced Support : Yes
Memory Module 1
Manufacturer : Samsung
Model : M3 68L3223DTL-CB0
Serial Number : F202E155
Type : 256MB DDR-SDRAM
Technology : 8x(32Mx8)
Speed : PC2100U 2.5-3-3-6
Date of Manufacture : Tuesday, December 10, 2002
Set Timing @ 133MHz : 2.5-3-3-6
Set Timing @ 100MHz : 2.0-2-2-5
Memory Module 2
Manufacturer : SpecTek
Type : 256MB DDR-SDRAM
Technology : 8x(32Mx8)
Speed : PC2100U 2.5-3-3-6
Date of Manufacture : Wednesday, November 14, 2159
Set Timing @ 133MHz : 2.5-3-3-6
Set Timing @ 100MHz : 2.0-2-2-5
Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No
Temperature Sensor(s)
Board Temperature : 36.0°C / 96.8°F
CPU Temperature : 38.0°C / 100.4°F
Power / Aux Temperature : 60.0°C / 140.0°F td
Cooling Device(s)
Auto Fan Speed Control : No
Chassis Fan Speed : 5273rpm
Voltage Sensor(s)
CPU Voltage : 1.66V
Aux Voltage : 2.64V
+3.3V Voltage : 3.20V
+5V Voltage : 4.11V
+12V Voltage : 11.67V
-12V Voltage : -5.20V
-5V Voltage : -1.59V
Standby Voltage : 4.84V
AGP Bus(es) on Hub 1
Version : 3.05
Speed : 8x 66MHz (528MHz data rate)
Multiplier : 1/2x
Fast-Writes Enabled : Yes
Isochronous Mode Enabled : No
Addressing Enabled : 32-bit
Aperture Size : 256MB
PCI Bus(es) on Hub 1
Version : 2.10
Number of Bridges : 1
PCI Bus 0 : PCI (33MHz)
Multiplier : 1/5x
LPC Hub Controller 1
Model : Giga-Byte Technology VT8237 PCI to ISA Bridge
ACPI Power Management Enabled : Yes
Delayed Transaction Enabled : Yes
Multiplier : 1/4x
Speed : 8MHz
DMA Multiplier : 1/2x
DMA Speed : 4MHz
USB Controller 1
Model : Giga-Byte Technology VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 2
Model : Giga-Byte Technology VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 3
Model : Giga-Byte Technology VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 4
Model : Giga-Byte Technology VT82xxxxx UHCI USB 1.1 Controller (All VIA Chipsets)
Version : 1.10
Interface : UHCI
Channels : 2
Speed : 48MHz
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps)
Legacy Emulation Enabled : No
USB Controller 5
Model : Giga-Byte Technology VT6202 USB 2.0 Enhanced Host Controller
Version : 2.00
Specification : 1.00
Interface : EHCI
Channels : 8
Companion Controllers : 4
Supported Speed(s) : Low (1.5Mbps) Full (12Mbps) High (480Mbps)
Addressing Support : 32-bit
Legacy Emulation Enabled : No
System SMBus Controller 1
Model : VIA VT823x SMBus
Advanced TCO Mode Enabled : No
Slave Device Enabled : No
PEC Support : No
Speed : 16kHz
Expansion Slot(s)
PCI (9h) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available
PCI (Ah) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available
PCI (Bh) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available
PCI (Ch) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available
PCI (Dh) : PCI 32-bit +5V +3.3V PME i2c/SMBus Full-Length Available
AGP (8h) : AGP 32-bit +5V Full-Length Used (Giga-Byte Technology GeForce 6600 GT)
My System:
CPU : AMD "Barton" 2500+.
Memory : 768MB DDR PC2100.
GFX : Nvidia 6600GT DDR3 128MB , AGPx8
M\B: Gigabyte GA-7VT600P-RZ MotherBoard
Sound: AC97 Realteck 5.1 ALC655 - Audio.
