Tomb Raider (Tomb Rambo 2013) View previous topic :: View next topic  


NFOHump.com Forum Index - PC Games Arena
Page 60 of 108 Goto page Previous  1, 2, 3 ... 59, 60, 61 ... 106, 107, 108  Next
rayida




Posts: 1233
PostPosted: Tue, 5th Mar 2013 01:38    Post subject:
Having completed the PS3 version, I have to say I didn't think there were too many QTEs. I mean if you choose to melee all of your enemies, then sure, it's one button to activate then another timed press, but most enemies should be dead before they even get close enough to melee. I don't consider having to hammer the same button multiple times to wedge a door or box open a QTE, a QTE to me is when you're prompted to press a sequence of buttons at a determined timeframe, and TR only has a couple of those, none more than two presses IIRC. It's certainly not GOW territory.
Back to top
pikachupi




Posts: 4180
PostPosted: Tue, 5th Mar 2013 01:41    Post subject:
it is so nice to hear finaly that the game is good,cause so so many disapointments during the last few years,so it is great to see shiny happy people finaly Smile

p.s,getting it now after i cleaned some hd space and will test it probably tomorrow and i hope as nvidia user to have clean expirience (i have 560 ti so maybe mine will not crash like the 6 series)
Back to top
Yondaime
VIP Member



Posts: 11741
PostPosted: Tue, 5th Mar 2013 01:44    Post subject:
⁢⁢


Last edited by Yondaime on Mon, 2nd Dec 2024 15:40; edited 1 time in total
Back to top
pikachupi




Posts: 4180
PostPosted: Tue, 5th Mar 2013 01:55    Post subject:
@Yondaime

yea,but looks like all in all,people are happy with the game and i am glad that finaly,something we seen a while ago and it looked great in that old trailers from year+ ago,but i was kinda skeptic,casue we seen so many disapointments,but...finaly the final product stands to its expectations:)
Back to top
Yondaime
VIP Member



Posts: 11741
PostPosted: Tue, 5th Mar 2013 02:01    Post subject:
⁢⁢


Last edited by Yondaime on Mon, 2nd Dec 2024 15:40; edited 1 time in total
Back to top
weakpoint




Posts: 463
Location: Giant Crab
PostPosted: Tue, 5th Mar 2013 02:16    Post subject:
4treyu wrote:
I tried my Logitech Rumblepad 2 and it doesn't seem to be supported, button bindings are all over the place. And it doesn't work well even using the x360ce emulator.

Works fine with Rumblepad 2 and x360ce, you'll just need to rename xinput1_3.dll to xinput9_1_0.dll
Back to top
4treyu




Posts: 23124
PostPosted: Tue, 5th Mar 2013 02:26    Post subject:
Thanks for the tip, I won't be using my gamepad for this game anyway, plays really good with kb/m. But I would like to understand why you need to change the filename for that DLL, if it's not asking too much Razz
Back to top
CaptnNemo




Posts: 909
PostPosted: Tue, 5th Mar 2013 02:43    Post subject:
4treyu wrote:
Thanks for the tip, I won't be using my gamepad for this game anyway, plays really good with kb/m. But I would like to understand why you need to change the filename for that DLL, if it's not asking too much Razz


For those who wants to play with their PS3 controller..You can use MotionJoy http://www.motioninjoy.com/ and set it by default for xbox 360 pad...but will still work perfectly with the PS3 one...been using this for a long time now and never had any problems..And you dont have to rename files and stuff like that. Very Happy

Cheers!!

Lian-Li XL Dynamic ROG Black - EVGA 1000w - Lian-li Galahad 360 AIO - MSI X570 Meg Ace - Rysen 5950x - G.Skill 4x16GB CL14 3600@3800(14-15-15-34) - Samsung 960 Pro 512 - Samsung 960 Pro 1TB - Kingston HyperX SSD 120gb SATA 3 (6gb/s) - WD Black Caviar 2x 2TB SATA 3 (6gb/s) Raid 0 - WD Black Caviar 2 TB SATA 3 (6gb/s) - EVGA 3090 FTW3 - LG C1 48" 4k120hrz
Back to top
4treyu




Posts: 23124
PostPosted: Tue, 5th Mar 2013 03:09    Post subject:
Yeah I've used MotionJoy in the past so I could play my heavily modded NBA2K11 on my pc with my cousin, with him using his PS3 controller. Then I reinstalled Win7 and never got to reinstall MotionJoy again and just kept using x360ceemu as it was really esy to setup in most cases Razz

But I'll take your advice for future games.
Back to top
Pey




Posts: 5597
Location: Argentina
PostPosted: Tue, 5th Mar 2013 03:09    Post subject:
Is anyone having major slowdowns?

Seasonic 1000w Planitum - TT Level 10 GT - ASUS M5E - i7 2600k @ 5.0ghz - 16GB Patriot Viper 3 - Dell u3011 - EVGA GTX 980 @ SLI - SSD Samsung EVO 250GB - 16TB W.D. - G19/G13 @ Roccat Kone XTD - Razer Vespula - Xonar Phoebus @ Vulcan ANC/Corsair 2100 Vengeance - Logitech G51
Back to top
4treyu




Posts: 23124
PostPosted: Tue, 5th Mar 2013 03:15    Post subject:
Not really. Only crashes Razz
Back to top
zellar




Posts: 1553
PostPosted: Tue, 5th Mar 2013 03:18    Post subject:
My video card's fan goes crazy with this game....I have been trying different settings trying to keep the card temp in check...but not much luck....103 to 105 degrees sometimes....any help please?

Gigabyte Z590 UD AC Motherboard - Intel i5-11600k 3.90 GHZ - 32 GB DDR 4 Corsair Vengeance LPX 3600MHz- GIGABYTE RTX 4070 Windforce OC 12GB (Driver 566.03) Corsair GOLD 80 Plus RM750x PSU Gigabyte QS32Q 32" flat screen Gaming Monitor
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Tue, 5th Mar 2013 03:19    Post subject:
Clean your card?
Get better airflow in the case?

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
zellar




Posts: 1553
PostPosted: Tue, 5th Mar 2013 03:21    Post subject:
Card is clean and I have 3 fans...this game seems to be the culprit....adjusting settings helps a bit....think a patch might help.

Gigabyte Z590 UD AC Motherboard - Intel i5-11600k 3.90 GHZ - 32 GB DDR 4 Corsair Vengeance LPX 3600MHz- GIGABYTE RTX 4070 Windforce OC 12GB (Driver 566.03) Corsair GOLD 80 Plus RM750x PSU Gigabyte QS32Q 32" flat screen Gaming Monitor
Back to top
Pey




Posts: 5597
Location: Argentina
PostPosted: Tue, 5th Mar 2013 03:25    Post subject:
4treyu wrote:
Not really. Only crashes Razz


LOL. No crashes here, i´m not using the crack btw. There seem to be some performance issues, fps go from 60 to 5 and to 60 again at time, it´s really annoying.

Seasonic 1000w Planitum - TT Level 10 GT - ASUS M5E - i7 2600k @ 5.0ghz - 16GB Patriot Viper 3 - Dell u3011 - EVGA GTX 980 @ SLI - SSD Samsung EVO 250GB - 16TB W.D. - G19/G13 @ Roccat Kone XTD - Razer Vespula - Xonar Phoebus @ Vulcan ANC/Corsair 2100 Vengeance - Logitech G51
Back to top
weakpoint




Posts: 463
Location: Giant Crab
PostPosted: Tue, 5th Mar 2013 03:34    Post subject:
4treyu wrote:
But I would like to understand why you need to change the filename for that DLL, if it's not asking too much Razz

From the x360ce.exe help tab:
Quote:
Problem: Game can't detect your controller
Reason: Game executable can look for xinput dll by different names.
Solution: Create copy of xinput1_3.dll with name provided below till you find one that works:
xinput1_2.dll
xinput1_1.dll
xinput9_1_0.dll
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Tue, 5th Mar 2013 03:47    Post subject:
zellar wrote:
Card is clean and I have 3 fans...this game seems to be the culprit....adjusting settings helps a bit....think a patch might help.


Odd, did you give other (older/newer) drivers another try?
Because usually overheating is really rarely caused by just the game, the game can't do more then use 99% gpu (wich should mean that it reaches it's limit and it SHOULD be able to handle that)...
Try running furmark and see if you get the same Smile

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
4treyu




Posts: 23124
PostPosted: Tue, 5th Mar 2013 03:59    Post subject:
Pey wrote:
4treyu wrote:
Not really. Only crashes Razz


LOL. No crashes here, i´m not using the crack btw. There seem to be some performance issues, fps go from 60 to 5 and to 60 again at time, it´s really annoying.


What in-game settings are you using? A lot of people on different forums say it's the Tessellation. When the game doesn't crash performance here is very stable, and gpu usage is maxed most of the time.

weakpoint wrote:
4treyu wrote:
But I would like to understand why you need to change the filename for that DLL, if it's not asking too much Razz

From the x360ce.exe help tab:
Quote:
Problem: Game can't detect your controller
Reason: Game executable can look for xinput dll by different names.
Solution: Create copy of xinput1_3.dll with name provided below till you find one that works:
xinput1_2.dll
xinput1_1.dll
xinput9_1_0.dll


Thanks for your reply! Smile
Back to top
xyzg




Posts: 1835
PostPosted: Tue, 5th Mar 2013 04:00    Post subject:
TressFX whilst I like the feature for what it is, Lara's hair goes a bit weird sometimes.
Back to top
grimmmy




Posts: 1014
Location: London
PostPosted: Tue, 5th Mar 2013 04:02    Post subject:
Yeah, especially when it gets a bit breezy Smile

I'm running on ultimate settings and so far, zero crashes (HD7800, latest radion drivers)
Back to top
CaptnNemo




Posts: 909
PostPosted: Tue, 5th Mar 2013 04:07    Post subject:
I don't know if it was asked..But is there a way to modify the FOV somehow ?

I can't find a config file anywhere...or am I blind ? lol Very Happy

Thanks

Lian-Li XL Dynamic ROG Black - EVGA 1000w - Lian-li Galahad 360 AIO - MSI X570 Meg Ace - Rysen 5950x - G.Skill 4x16GB CL14 3600@3800(14-15-15-34) - Samsung 960 Pro 512 - Samsung 960 Pro 1TB - Kingston HyperX SSD 120gb SATA 3 (6gb/s) - WD Black Caviar 2x 2TB SATA 3 (6gb/s) Raid 0 - WD Black Caviar 2 TB SATA 3 (6gb/s) - EVGA 3090 FTW3 - LG C1 48" 4k120hrz
Back to top
Ashok0




Posts: 1733
Location: Ohio
PostPosted: Tue, 5th Mar 2013 04:25    Post subject:
Really like TressFX... I hope its in Witcher 3.
Back to top
zellar




Posts: 1553
PostPosted: Tue, 5th Mar 2013 04:25    Post subject:
sausje wrote:
zellar wrote:
Card is clean and I have 3 fans...this game seems to be the culprit....adjusting settings helps a bit....think a patch might help.


Odd, did you give other (older/newer) drivers another try?
Because usually overheating is really rarely caused by just the game, the game can't do more then use 99% gpu (wich should mean that it reaches it's limit and it SHOULD be able to handle that)...
Try running furmark and see if you get the same Smile


I haven't tried different drivers yet....I was having the same issue with Sniper Elite Nazi Zombie Army...but I lowered the settings and the temps became normal 75 to 80 degrees. I am still experimenting...but thanks for the advice. I will post back if I can get the temps normal while playing.

Edit....well lowering the settings has helped so far I played for 20min and the temps run between 78-90 degrees....will try more tomorrow.
Back to top
freeb0y




Posts: 233
PostPosted: Tue, 5th Mar 2013 04:47    Post subject:
i7 2600k @3.8ghz 16gigs ram @1600mhz GTX 570 SLI.

game set to ultra settings

ave FPS 90 min FPS 55 maximum FPS 130

played like 1 hour zero crashes...

btw tressFX looks nice and all.... BUT its like her hair is as light as a feather. blows all over the place. and if she gets wet still all same and her hair stays dry lol. and shes the only one who gets tressFX thought everyone would have it Sad

so ive turned it off for now untill her hair gets some weight to it.(patch please)

she has medusa hair lol
Back to top
djdahren




Posts: 376
Location: Jamaica
PostPosted: Tue, 5th Mar 2013 05:15    Post subject:
mine crashes/pauses while a scene is playing. if try to click mouse, it says, "loading". after that my, computer moves really slow and i have to force restart.

all settings are on normal, no tessellation
using skridrow crack, amd 6870 - latest drivers
Back to top
BLuNT318




Posts: 1642
Location: Earth
PostPosted: Tue, 5th Mar 2013 05:27    Post subject:
I know it'll sound odd, but I just kinda had that same issue with Far Cry 3, aside from I don't have to reboot. It finds itself again a few seconds later.. Right before loading screens, odd I know

2600k, GigaByte R9 290x, 8 gis of ram on Windows 7 X64
Back to top
djdahren




Posts: 376
Location: Jamaica
PostPosted: Tue, 5th Mar 2013 05:43    Post subject:
mine crashes here to be exact, no matter if i continue or start a new game. this is windowed mode, v-sync off, no tessellation
 Spoiler:
 
Back to top
need4speed2009




Posts: 28
PostPosted: Tue, 5th Mar 2013 05:55    Post subject:
bloodian wrote:
 Spoiler:
 


edit:
i'd never would have guessed it could be perceived as a spoiler... but... ook.


 Spoiler:
 
Back to top
Pey




Posts: 5597
Location: Argentina
PostPosted: Tue, 5th Mar 2013 06:02    Post subject:
TressFX was the cause of the slowdowns, getting 60fps now @ 2560x1600 fxaa ultimate details, shocker.

Also, using SSAA cause gfx corruption, no issue with fxaa. see water here:




Seasonic 1000w Planitum - TT Level 10 GT - ASUS M5E - i7 2600k @ 5.0ghz - 16GB Patriot Viper 3 - Dell u3011 - EVGA GTX 980 @ SLI - SSD Samsung EVO 250GB - 16TB W.D. - G19/G13 @ Roccat Kone XTD - Razer Vespula - Xonar Phoebus @ Vulcan ANC/Corsair 2100 Vengeance - Logitech G51
Back to top
Breezer_




Posts: 10797
Location: Finland
PostPosted: Tue, 5th Mar 2013 06:23    Post subject:
Played yesterday couple hours and it ran great, must be Nvidia issue. Minimum was about low 30s in some cinematics when TressFX hair is close. Other than that, runs like 40fps+ all the time, and looks gorgeous (everything maxed out @ 1440p) Razz Very good game, absolutely loving it, Crystal Dynamics nailed it.
Back to top
Page 60 of 108 All times are GMT + 1 Hour
NFOHump.com Forum Index - PC Games Arena Goto page Previous  1, 2, 3 ... 59, 60, 61 ... 106, 107, 108  Next
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group