| Page 140 of 214 |
JBeckman
VIP Member
Posts: 34974
Location: Sweden
|
 Posted: Thu, 6th Oct 2011 22:05 Post subject: |
|
 |
| Sin317 wrote: | | jbeckman , tried "binds showall" on console ? |
listBinds showed nothing unfortunately, I believe the command is hardcoded.
I'll see if I can find some other command for it, say to take down the console window or similar.
EDIT: activateconsole 1 and activateconsole 0
("Bind F11 activateconsole 0" and "Bind F12 activateconsole 1" as a example.)
EDIT:
| Quote: |
Hi JBeckam
the settings from my Nvidia Card (Systemstearing) , 3dsetup all on standart ?
sorry for my bad english
|
I apologize if I misunderstood but I assume you mean the NVIDIA control panel and the 3D settings therein and yes you can keep the at standard values, Rage has a specific profile as of the latest drivers (Apparently also a separate update profile.) which should be quite OK albeit it apparently disables VSync (Which the command r_fixedinterval 1 corrects, hope I used the right name there.) however do not force AA or AF if possible, set AA in-game and AF via console commands ideally.
(Or keep it at 8 AF max if you do force it.)
You don't need any specific tweaks either as the drivers and CUDA acceleration should take care of most streaming issues though I suppose things can be optimized a bit with some small adjustments.
EDIT: Ah yes keyboard localization would also help, I missed that.
(Did it in NWN2 years back to get the console working there.)
EDIT: Re-adjusted some few commands in zSettings.cfg, fully stable and stutter free now with only some minor blue texture tint at far away objects for some seconds until it's all loaded in.
 Spoiler: |
seta com_AllowConsole 1
seta com_SkipIntroVideo 1
seta mem_phymemblocksizem 512
seta image_lodbias -1
seta image_anisotropy 16
seta image_usecompression 0
seta image_screenshotquality 100
seta vt_qualityhdplossless 1
seta vt_qualityhdppower 0
seta vt_qualityhdpspecular 0
seta vt_qualityhdpnormal 0
seta vt_qualityhdpdiffuse 0
seta vt_qualitydctpower 100
seta vt_qualitydctspecular 100
seta vt_qualitydctnormal 100
seta vt_qualitydctchroma 100
seta vt_qualitydctluma 100
seta vt_usecudatranscode 2
seta vt_maxppf 64
seta vt_maxlockedpages 32
seta vt_pageimagesizeuniquediffuseonly2 8192
seta vt_pageimagesizeuniquediffuseonly 8192
seta vt_pageimagesizeunique 8192
seta vt_pageimagesizevmtr 8192
seta vt_minlod -1
seta vt_vmtrcompression none
seta vt_uncompressedvmtr 1
seta vt_uncompressedphysicalimages 0
seta vt_maxaniso 8
set vt_restart
cvaradd ai_bloodspray 1
cvaradd ai_usecombatsubtitles 1
cvaradd com_skipintrovideo 1
cvaradd g_showplayershadow 1
cvaradd g_triplef_pottymouth 1
cvaradd g_aimassist_disable_all 1
cvaradd pm_vehiclefreecam 1
cvaradd r_hardwaretextures 1
cvaradd r_dimshadowforcehighquality 1
cvaradd r_swapinterval -1
|
(vt_uncompressedphysicalimages back to 0 and the two page commands down to 32 and 64)
Last edited by JBeckman on Thu, 6th Oct 2011 22:17; edited 3 times in total
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 22:10 Post subject: |
|
|
@Sabin , simply add US keyboard layout to language bar, set it as default and you get console ingame ^^
long time since i had to do this lol.
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:15 Post subject: |
|
|
| sausje wrote: | Pumpy, try this.
Download this file: http://www.multiupload.com/34V32B5VP9
Put in main directory where the exe is located: "C:\Program Files (x86)\Bethesda Softworks\Rage"
remove ALL configs/tweaks (including exe parameters, or w/e its called you put behind exe) you made, just start with a clean config.
Then it "should" work flawless. |
Tried adding this file into C:\Program Files (x86)\Bethesda Softworks\Rage and now i just get the application has closed etc. before i added it i was getting console error with "wglCreateContextAttribsARB failed"
thoughts?
Last edited by Watto1020 on Thu, 6th Oct 2011 22:17; edited 2 times in total
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:15 Post subject: |
|
|
| Sin317 wrote: | @Sabin , simply add US keyboard layout to language bar, set it as default and you get console ingame ^^
long time since i had to do this lol. |
It's ok mate, I tried again earlier and now "ø" DOES open the console. Thanks though =)
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 22:18 Post subject: |
|
|
which key is that for you ? left from enter ?
lol nm, yeah for me console is the one top left from Enter ( ¨ or ! in german layout)
it was there all alone ... silent .. stupid keys, start talking ^^
Last edited by Sin317 on Thu, 6th Oct 2011 22:20; edited 1 time in total
|
|
| Back to top |
|
|
sausje
Banned
Posts: 17716
Location: Limboland, Netherlands
|
| Posted: Thu, 6th Oct 2011 22:20 Post subject: |
|
|
| Watto1020 wrote: | | sausje wrote: | Pumpy, try this.
Download this file: http://www.multiupload.com/34V32B5VP9
Put in main directory where the exe is located: "C:\Program Files (x86)\Bethesda Softworks\Rage"
remove ALL configs/tweaks (including exe parameters, or w/e its called you put behind exe) you made, just start with a clean config.
Then it "should" work flawless. |
Tried adding this file into C:\Program Files (x86)\Bethesda Softworks\Rage and now i just get the application has closed etc. before i added it i was getting console error with "wglCreateContextAttribsARB failed"
thoughts? |
1. This is PURE for ATI ONLY!
2. are you using skidrow version, seems to me that install aint complete.
Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
 |
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:21 Post subject: |
|
|
i installed skidrow release. yeah ati driver.. x1950 card, latest 11.9 drivers.. windows xp 64bit fully patched..
install seemed to go fine, inserted all 3 disks etc, copied over skidrow content to rage folder etc..
Last edited by Watto1020 on Thu, 6th Oct 2011 22:22; edited 1 time in total
|
|
| Back to top |
|
|
Werelds
Special Little Man
Posts: 15098
Location: 0100111001001100
|
| Posted: Thu, 6th Oct 2011 22:21 Post subject: |
|
|
| KaSssss wrote: | Some news
| Quote: | lmost all the issues with RAGE are hardware/driver related and not an issue with the game itself.
Please note the following from Bethesda:
ATI and NVIDIA are working on updated drivers that should be released today/tomorrow that will fix multiple issues.
Bethesda is working on an update to allow for users to customize their video options which will solve many of the issues users are having.
For the latest information please visit http://www.bethblog.com
Thank you for your patience with this matter. All parties are working as fast as they can to correct the problems with RAGE. |
|
What a fucking load of bollocks.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 22:24 Post subject: |
|
|
| Watto1020 wrote: | i installed skidrow release. yeah ati driver.. x1950 card, latest 11.9 drivers.. windows xp 64bit fully patched..
install seemed to go fine, inserted all 3 disks etc, copied over skidrow content to rage folder etc.. |
x1950 ? you sure that card supports current opengl ?
|
|
| Back to top |
|
|
sausje
Banned
Posts: 17716
Location: Limboland, Netherlands
|
| Posted: Thu, 6th Oct 2011 22:25 Post subject: |
|
|
| Sin317 wrote: | | Watto1020 wrote: | i installed skidrow release. yeah ati driver.. x1950 card, latest 11.9 drivers.. windows xp 64bit fully patched..
install seemed to go fine, inserted all 3 disks etc, copied over skidrow content to rage folder etc.. |
x1950 ? you sure that card supports current opengl ? |
Was just thinking the same, damn that card is old. Seriously you get a better upgrade for 15 euros secondhand.
Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:26 Post subject: |
|
|
Sin317 - im not sure but when i go into catalyst control panel there is an open gl section with triple buffer option etc.
|
|
| Back to top |
|
|
|
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:30 Post subject: |
|
|
heya
tried to find here a fix for my prob
8800gt - 512
xp sp3
quad q6600
no textures at all (just see the commands look left look right)
installed today newest nvidia driver
any clue please?
tia
|
|
| Back to top |
|
|
JBeckman
VIP Member
Posts: 34974
Location: Sweden
|
| Posted: Thu, 6th Oct 2011 22:30 Post subject: |
|
|
| Watto1020 wrote: | | Sin317 - im not sure but when i go into catalyst control panel there is an open gl section with triple buffer option etc. |
Rage wants to use OpenGL 3.2 (Possibly 3.3) which would be the ATI 3000 series and above (Possibly also the 2000 series.) since it needs DX10 / SM4 functionality.
I am unsure if Rage is backwards compatible with 2.x versions of OpenGL but I would assume it's not so it might be difficult getting the game fully functional on such hardware unfortunately.
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:33 Post subject: |
|
|
Cheers JB/sin/sausje - will look into new card and for now clear 20gb off my C:/ hehe
|
|
| Back to top |
|
|
sausje
Banned
Posts: 17716
Location: Limboland, Netherlands
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:35 Post subject: |
|
|
Carmack is stupid to use OpenGL, because its not a mainstream platform. Damn he could have used DirectX9 and polish the PC version of the game for a month and we all could have run it perfectly fine. If he replaced megatextures to tiled textures the game could take like 7gigs. What a retard...
|
|
| Back to top |
|
|
locke89
Posts: 2812
Location: Poland
|
| Posted: Thu, 6th Oct 2011 22:37 Post subject: |
|
|
| Werelds wrote: | | KaSssss wrote: | Some news
| Quote: | lmost all the issues with RAGE are hardware/driver related and not an issue with the game itself.
Please note the following from Bethesda:
ATI and NVIDIA are working on updated drivers that should be released today/tomorrow that will fix multiple issues.
Bethesda is working on an update to allow for users to customize their video options which will solve many of the issues users are having.
For the latest information please visit http://www.bethblog.com
Thank you for your patience with this matter. All parties are working as fast as they can to correct the problems with RAGE. |
|
What a fucking load of bollocks. |
Hahaha, they think I'll install another fucking drivers just to run this shit? They must be out of their fucking mind. God, I'm so glad I didn't buy this. I hope those fuckers will get tons of returned games.
I bet that next drivers won't solve half the issues people are having with this POS.
Last edited by locke89 on Thu, 6th Oct 2011 22:38; edited 1 time in total
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 22:38 Post subject: |
|
|
another handy command :
pm_noBob 1 // Removes head bob and weapon sway
ok, why doesnt it accept this commands ? is there a command to disable anti cheat or something (ie allows commands like the above to be used ?)
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 22:43 Post subject: |
|
|
Huge game :/ Hope I can run this on my computer!
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 22:47 Post subject: |
|
|
| Sin317 wrote: | another handy command :
pm_noBob 1 // Removes head bob and weapon sway
ok, why doesnt it accept this commands ? is there a command to disable anti cheat or something (ie allows commands like the above to be used ?) |
ok figured it out , to change such cvars, you need :
cvarAdd pm_noBob 1
this should go for any other cvar that wont change by itself.
add:
For those with nvidia cards who have a lot of vertical tearing (when moving mouse up and down, tearing across the screen). Go to nvidia CP and in the rage specific settings. for some idiot reason, nvidia turned vsync OFF by default, so no matter what you set ingame for r_swapinterval, it was ignored.
so change it to" use the 3d applicationsetting and then set r_swapinterval to 1 or -1 in cfg or ingame in console (-1 is default, so you dont have to do anything, unless you want to change to 1)
add:
i seen many here using "mem_phymemblocksize" and then adding their vram value to it, well, i dont think that this value has anything to do with your video ram ^^ (default value is 190), but something different entirely.
add:
also note, this rage build we have, is the 32 bit one, lets hope we get the 64 bit build soon ...
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 23:21 Post subject: |
|
|
| Sin317 wrote: |
For those with nvidia cards who have a lot of vertical tearing (when moving mouse up and down, tearing across the screen). Go to nvidia CP and in the rage specific settings. for some idiot reason, nvidia turned vsync OFF by default, so no matter what you set ingame for r_swapinterval, it was ignored.
|
Well, that's notthe case in the bf3 beta drivers. Vsync set to "application settings" by default in the Rage profile there. I'm using of course the "r_swapinterval 1" and no tearing.
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 23:23 Post subject: |
|
|
ATI 11.9
WIN7 64
I have a weird stuttering, the game freezes for 3 sec every 5 sec or so.
Seems its the CPU, its at 100% all the time.
Is my CPU bad for this game, or is there a leak?
I have E8400, should be ok?
(Might mention that i use dual monitors also, the game is only on one of them, so im guessing that wont affect the CPU more than a few %.)
|
|
| Back to top |
|
|
tonizito
VIP Member
Posts: 51397
Location: Portugal, the shithole of Europe.
|
| Posted: Thu, 6th Oct 2011 23:25 Post subject: |
|
|
| Werelds wrote: | | KaSssss wrote: | Some news
| Quote: | lmost all the issues with RAGE are hardware/driver related and not an issue with the game itself.
Please note the following from Bethesda:
ATI and NVIDIA are working on updated drivers that should be released today/tomorrow that will fix multiple issues.
Bethesda is working on an update to allow for users to customize their video options which will solve many of the issues users are having.
For the latest information please visit http://www.bethblog.com
Thank you for your patience with this matter. All parties are working as fast as they can to correct the problems with RAGE. |
|
What a fucking load of bollocks. |
+1.
And that would mean that ID did no Q&A whatsoever, wouldn't it? 
| boundle (thoughts on cracking AITD) wrote: | | i guess thouth if without a legit key the installation was rolling back we are all fucking then |
|
|
| Back to top |
|
|
sausje
Banned
Posts: 17716
Location: Limboland, Netherlands
|
| Posted: Thu, 6th Oct 2011 23:26 Post subject: |
|
|
| KeyserSoeze wrote: | ATI 11.9
WIN7 64
I have a weird stuttering, the game freezes for 3 sec every 5 sec or so.
Seems its the CPU, its at 100% all the time.
Is my CPU bad for this game, or is there a leak?
I have E8400, should be ok?
(Might mention that i use dual monitors also, the game is only on one of them, so im guessing that wont affect the CPU more than a few %.) |
You use any config? I noticed getting those stutters when having a configfile enabled.
Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 23:28 Post subject: |
|
|
| KeyserSoeze wrote: | ATI 11.9
WIN7 64
I have a weird stuttering, the game freezes for 3 sec every 5 sec or so.
Seems its the CPU, its at 100% all the time.
Is my CPU bad for this game, or is there a leak?
I have E8400, should be ok?
(Might mention that i use dual monitors also, the game is only on one of them, so im guessing that wont affect the CPU more than a few %.) |
Disabling the Catalyst A.I. should remove the freezing.
EDIT: Also have an E8400 and HD5850 and runs fine.
Last edited by VFik on Thu, 6th Oct 2011 23:30; edited 1 time in total
|
|
| Back to top |
|
|
Sin317
Banned
Posts: 24322
Location: Geneva
|
| Posted: Thu, 6th Oct 2011 23:30 Post subject: |
|
|
| 4treyu wrote: | | Sin317 wrote: |
For those with nvidia cards who have a lot of vertical tearing (when moving mouse up and down, tearing across the screen). Go to nvidia CP and in the rage specific settings. for some idiot reason, nvidia turned vsync OFF by default, so no matter what you set ingame for r_swapinterval, it was ignored.
|
Well, that's notthe case in the bf3 beta drivers. Vsync set to "application settings" by default in the Rage profile there. I'm using of course the "r_swapinterval 1" and no tearing. |
i have the "bf3 beta" drivers, 285.38 , clean install (reset all profiles blabla) and it was set to force off (weird enough, thats not the default nvidia setting, but it was set to that anyway, no idea why, i sure didnt set it hehe)
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 23:42 Post subject: |
|
|
Question....how the fuck do i disable catalist AI ? All i got in my CCC is : performance - > High Quality slider
And subsurface optimizations
|
|
| Back to top |
|
|
|
|
| Posted: Thu, 6th Oct 2011 23:45 Post subject: |
|
|
| Shakabutt wrote: | Question....how the fuck do i disable catalist AI ? All i got in my CCC is : performance - > High Quality slider
And subsurface optimizations |
From steam forums:
-Set the Catalyst AI part to highest and eneable surface format optimisation
-Close the CCC.exe and MOM.exe processes.
-Open profiles.xml with notepad or w/e, it's in appdata\local\ATI. Edit so that you have <Property name="CatalystAI" value="Disable" /> instead of "Enable".
-After you save the file, set it to "Read only".
-Go to your ATI program folder and launch MOM.exe.
-Reboot
-?
-profit
|
|
| Back to top |
|
|
| Page 140 of 214 |
All times are GMT + 1 Hour |
