DIE - where are theese guys doing with sf3? View previous topic :: View next topic  


NFOHump.com Forum Index - Protection Bitch'n
Page 1 of 1
Selt




Posts: 1493
PostPosted: Fri, 20th May 2005 00:01    Post subject: DIE - where are theese guys doing with sf3?
so, after they cracked pcodes in the scrapland release, i though they were so lame to use demo files to release still life, the timing of their release was perfect to think of demo files, but after i checked their files it was clear that they did the whole clean job in cracking sf3 again...

now... silentgate has released the german version of still life with the permission from DIE to use their cracked files in the release... the interesting thing is what we can read in the special notes at the end of silentage nfo:

" Thanks to DIE team that allowed us to use their lovely crack for this
localized GERMAN release. You guys rock and its a pleasure to have
found you and to be talking to you the past days exchanging infos about
starforce. Good luck with Splinter Cell Smile. "

so... what's your though on die and their sf3 job? seems like their not like ultima and they wants to get involved in the scene and share knowledge right?
Back to top
msnes




Posts: 398
Location: Greece
PostPosted: Fri, 20th May 2005 00:32    Post subject:
Hope they are close to give us the other titles......But its strange that reloaded have disappeared.I think that groups are planning the titles they are cracking.Hoodlum/vengeance are for securom titles reloaded and others (ultima,die) for sf3
Back to top
bigboy177




Posts: 430
PostPosted: Fri, 20th May 2005 01:12    Post subject:
DIE is a great group I think... They have potential... And I think we'll be seeing a lot of good games from them... Mostly SF3 protected I think... Smile
They have proved that they can crack SF3... I only hope they will learn to do it even more efficiently... (quickly)... and I also hope that other groups will jump in... Cause RLD VNG and HLM are a little less active nowadays...
Back to top
MartinW




Posts: 100
PostPosted: Fri, 20th May 2005 02:15    Post subject:
Strange. They did not write "crack" word in NFO, they did not write "cracked by" or "cracker" word in NFO. They wrote "copy the file from crack dir". It sounds like not cracked.
Back to top
Freakshow




Posts: 410
PostPosted: Fri, 20th May 2005 06:44    Post subject:
MartinW wrote:
Strange. They did not write "crack" word in NFO, they did not write "cracked by" or "cracker" word in NFO. They wrote "copy the file from crack dir". It sounds like not cracked.


but DIE files in their crack are for sure cracked and removed sf3 files. All 4 dlls are protected with sf3 in the final release and do codediffer to the old unprotected demo files and their exe has sf3 removed too. So for sure they can crack sf3 proper.

I wonder why they took so long to get a release to the world. Their crackwas avaiable on most crackonly sites in the net already. Maybe they used earlier released italian or french versions to remove the sf3 as english and italian files are codeident.

DIE for sure is a nice group but to be honest they use the same ways to crack reloaded/fairlight/immersion used in the past so it wil be always the long run. Maybe they realy work on splinter cell? Smile

Good Luck DIE and maybe they get more to scene through Silentgate, germanys nr2 release group after GENESIS who can also do sf3 btw. They cracked sf 3.4.76.00 with 100mb .dat file i heared. Not sure about this though as i didnt touch myself and english was out already but if yes then good job from GENESIS too.
Back to top
Brisk




Posts: 1557
Location: Dutch...
PostPosted: Fri, 20th May 2005 09:27    Post subject:
The crack DiE used for Still Life was leechable on p2p (before gcw etc) for days already. Compared the files and are dupe.
Back to top
Selt




Posts: 1493
PostPosted: Fri, 20th May 2005 09:33    Post subject:
BRISK#1 wrote:
The crack DiE used for Still Life was leechable on p2p (before gcw etc) for days already. Compared the files and are dupe.


exactly my thoughts... then i compared and they are not at all the same files, they cracked again sf3 in still life
Back to top
bigboy177




Posts: 430
PostPosted: Fri, 20th May 2005 11:18    Post subject:
Freakshow wrote:

Good Luck DIE and maybe they get more to scene through Silentgate, germanys nr2 release group after GENESIS who can also do sf3 btw. They cracked sf 3.4.76.00 with 100mb .dat file i heared. Not sure about this though as i didnt touch myself and english was out already but if yes then good job from GENESIS too.


Even if DIE is using the old way.... maybe they will find a quicker way to do it... or some very helpfull new tool which will speed up the proces...

About GENESIS I too heard abou them beeing able to crack SF3, and that 100MB dat file... Just yesterday they released German version of Star Wolves which is protected with SF3... At last all around the world ppl are trying to break SF3... I wonder who will win this round. Till now it's SF3 - 1 Scene - 0... but I think it's all about to make a turn... Wink
Back to top
Freakshow




Posts: 410
PostPosted: Fri, 20th May 2005 12:59    Post subject:
bigboy177 wrote:
About GENESIS I too heard abou them beeing able to crack SF3, and that 100MB dat file... Just yesterday they released German version of Star Wolves which is protected with SF3... At last all around the world ppl are trying to break SF3... I wonder who will win this round. Till now it's SF3 - 1 Scene - 0... but I think it's all about to make a turn... Wink


cool if you could get the protect.dll or the big dll every protection scanner detects sf3 version from ... could you plz do the following?

leech
http://scifi.pages.at/yoda9k/LordPE/LPE-DLX.ZIP

start lordpe.exe
at right top choose PE Editor
Pick the protect.dll (the dll protectionid fe detects sf3 within)
click right in the middle on sections
pick the 1st sforce3 section -> right mouse button -> hex edit section
(1st section if u open in hex edit starts allways at 0x0400h so copy is easy too)
copy me the 1st 128 Bytes plz
every line = 16 Bytes => 8 lines plz Smile

if there exist a .brick section (should not exist there normaly if its only a sf3 decryption but no ingame .dll) do the same for this scetion too.

I just want to know what sf3 this is as i cant get intouch with german games Sad.

thx
Back to top
bigboy177




Posts: 430
PostPosted: Sat, 21st May 2005 10:53    Post subject:
Freakshow wrote:
bigboy177 wrote:
About GENESIS I too heard abou them beeing able to crack SF3, and that 100MB dat file... Just yesterday they released German version of Star Wolves which is protected with SF3... At last all around the world ppl are trying to break SF3... I wonder who will win this round. Till now it's SF3 - 1 Scene - 0... but I think it's all about to make a turn... Wink


cool if you could get the protect.dll or the big dll every protection scanner detects sf3 version from ... could you plz do the following?

leech
http://scifi.pages.at/yoda9k/LordPE/LPE-DLX.ZIP

start lordpe.exe
at right top choose PE Editor
Pick the protect.dll (the dll protectionid fe detects sf3 within)
click right in the middle on sections
pick the 1st sforce3 section -> right mouse button -> hex edit section
(1st section if u open in hex edit starts allways at 0x0400h so copy is easy too)
copy me the 1st 128 Bytes plz
every line = 16 Bytes => 8 lines plz Smile

if there exist a .brick section (should not exist there normaly if its only a sf3 decryption but no ingame .dll) do the same for this scetion too.

I just want to know what sf3 this is as i cant get intouch with german games Sad.

thx


I don't have it yet... But soon... Wink
Back to top
Asdone




Posts: 26
PostPosted: Sat, 21st May 2005 23:49    Post subject:
i am waiting for trackmania sunrise or sc:ct release.. i don't believe that they will come soon
Back to top
bigboy177




Posts: 430
PostPosted: Wed, 25th May 2005 19:07    Post subject:
Freakshow wrote:
bigboy177 wrote:
About GENESIS I too heard abou them beeing able to crack SF3, and that 100MB dat file... Just yesterday they released German version of Star Wolves which is protected with SF3... At last all around the world ppl are trying to break SF3... I wonder who will win this round. Till now it's SF3 - 1 Scene - 0... but I think it's all about to make a turn... Wink


cool if you could get the protect.dll or the big dll every protection scanner detects sf3 version from ... could you plz do the following?

leech
http://scifi.pages.at/yoda9k/LordPE/LPE-DLX.ZIP

start lordpe.exe
at right top choose PE Editor
Pick the protect.dll (the dll protectionid fe detects sf3 within)
click right in the middle on sections
pick the 1st sforce3 section -> right mouse button -> hex edit section
(1st section if u open in hex edit starts allways at 0x0400h so copy is easy too)
copy me the 1st 128 Bytes plz
every line = 16 Bytes => 8 lines plz Smile

if there exist a .brick section (should not exist there normaly if its only a sf3 decryption but no ingame .dll) do the same for this scetion too.

I just want to know what sf3 this is as i cant get intouch with german games Sad.

thx


PM went out... .sforce section 1st 128 Bytes... Wink

Checked it myself... And WOW... it's StarForce 3.4.76.00...

Genesis
Back to top
Page 1 of 1 All times are GMT + 1 Hour
NFOHump.com Forum Index - Protection Bitch'n
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group