nVidia can write drivers View previous topic :: View next topic  


NFOHump.com Forum Index - Hardware Zone
Page 9 of 59 Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 57, 58, 59  Next
rgb#000
Banned



Posts: 5118
PostPosted: Wed, 21st Aug 2013 17:26    Post subject:
locke89 wrote:
EDIT. NVM, seems the cable wasnt put in properly, 'cause everything works now without problems. Full sound, full screen, full 1080p on my tv, no black borders or anything. Guess I'm the lucky one, sausje Very Happy

i used various nvida gpus on various hdtvs and never had a problem, so i don't think you need "luck" to make it work. the only thing that's annoying is getting full RGB to work over hdmi and i can't fathom why nvidia doesn't add proper toggler for that, instead we have to resort to registry and .ini editing.
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Wed, 21st Aug 2013 17:30    Post subject:
locke89 wrote:
So, my GF GPU arrived, I plugged in my TV aaaaaaaaaaaaaaaand, Nvidia panel detects it all right, but I can't change the display on my tv to the PC - the HDMI port I'm using isn't even highlighted in the output menu of my TV like it should be.

Also, I notced that in "Viev HDCP status" in the NV panel it says my TV does not support HDCP. The fuck? It's 3 yo TV, it MUST have it.

Worked with no problems on ATI, ofc Very Happy Any solutions guys?

EDIT. NVM, seems the cable wasnt put in properly, 'cause everything works now without problems. Full sound, full screen, full 1080p on my tv, no black borders or anything. Guess I'm the lucky one, sausje Very Happy


FU Sad
Just a little longer and i'm back to the old trustworthy red side Razz

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
DV2




Posts: 5234
PostPosted: Wed, 21st Aug 2013 17:56    Post subject:
Now can your TV run 120hz?

ASUS X570 TUF GAMING PLUS, 32GB DDR4@2666 ,RYZEN 5800X3D (NO OC),GIGABYTE RTX 4070 Super GAMING OC, Western Digital Blue 4TB 5400RPM + SAMSUNG 860 EVO 500+1TB GB SSDs , OEM SATA DVD 22xNoctua NH-D15 Chromax Black, BenQ XL2420T Case: Be Quiet! DARK BASE PRO 901. PSU CORSAIR RM1200 SHIFT
Back to top
KaSssss




Posts: 2136
PostPosted: Wed, 21st Aug 2013 19:33    Post subject:
http://wccftech.com/nvidia-geforce-graphics-cards-offer-experience-latest-titles-ubisoft/

Very Happy
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Thu, 22nd Aug 2013 23:31    Post subject:
sausje wrote:
locke89 wrote:
So, my GF GPU arrived, I plugged in my TV aaaaaaaaaaaaaaaand, Nvidia panel detects it all right, but I can't change the display on my tv to the PC - the HDMI port I'm using isn't even highlighted in the output menu of my TV like it should be.

Also, I notced that in "Viev HDCP status" in the NV panel it says my TV does not support HDCP. The fuck? It's 3 yo TV, it MUST have it.

Worked with no problems on ATI, ofc Very Happy Any solutions guys?

EDIT. NVM, seems the cable wasnt put in properly, 'cause everything works now without problems. Full sound, full screen, full 1080p on my tv, no black borders or anything. Guess I'm the lucky one, sausje Very Happy


FU Sad
Just a little longer and i'm back to the old trustworthy red side Razz

What TV do you have? I have 2 HDTV's and each one has the option to enable/disable overscan. You sure yours doesn't? It's strange actually.

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Thu, 22nd Aug 2013 23:49    Post subject:
LG 37LC51 (quite an old model, got it in the early days of 1080p HDTV)

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Fri, 23rd Aug 2013 01:29    Post subject:
I quickly looked into it and there seems to be a problem with forced overscan in these. Well, at least that's what the first links Google finds say.

The only idea I have in mind is that you can try setting Aspect Ratio to Original, but you've probably done that.

The second issue very much related to nvidia drivers is that I couldn't help but make the sky in your avatar stand still. Razz



You can choose one if you like, or you can skip if you don't. I won't mind. Wink

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Fri, 23rd Aug 2013 01:33    Post subject:
lol thanks, that was actually annoying me as well Razz
Can't see the difference between the three, altho that might be because i'm rather sleepy atm Razz

Hover about the TV, i just found out that my actual digital decoder for HDTV is overscanning aswell.
I did find 1 option to move the image, but that was just to the left or right and up and down, but that's it Sad

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Fri, 23rd Aug 2013 01:39    Post subject:
Leftmost one - brightness and colours unaltered, the middle one - balanced out, rightmost one - luma and chroma altered the most to increase contrast and change colours a bit.

Regarding the TV, the very first link I found says you can access Service Menu and try your luck there. The guy on this forums, however, wasn't able to fix it. Sad

Quote:
i access the service menu bit hitting the menu key on both the rc and tv for a few seconds, the overscan setting is on system control sub menu, but since i don't have a manual i don't know if i have to change any other setting, i only dare to change the overscan (0-2) = (1%-7%), with no effect.

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Fri, 23rd Aug 2013 01:56    Post subject:
Yeah got into the menu, but it's a rather confusing one.
I messed around with stuff, but only a few options seem to do something (i say something because the screen quickly shows that something is being done, but i can't actually see any changes).

Here is the menu with all sub sections:

 Spoiler:
 

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Fri, 23rd Aug 2013 02:02    Post subject:
^ Well, that looks rather complicated.

Is there any overscan setting in System Control sub-menu?

EDIT: Sorry, I didn't click the links at first, just took a quick look at the thumbnails.

EDIT2: If OverScan option doesn't do anything, I have no idea what else can be done. Sad

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Fri, 23rd Aug 2013 04:20    Post subject:
Doesn't do anything at all, has 3 settings 1% 5% and 7% but swapping doesn't make any change..

Stupid that you CAN scale the screen when it's connected to the PC (VGA) port. (At least according to the manual) Neutral

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
JBeckman
VIP Member



Posts: 34991
Location: Sweden
PostPosted: Thu, 19th Sep 2013 13:14    Post subject:
http://www.guru3d.com/news_story/download_geforce_327_23_whql_driver.html

327.23 WHQL
Back to top
DV2




Posts: 5234
PostPosted: Thu, 19th Sep 2013 16:12    Post subject:
YEEEEEES!...gonna install it now with the correct "Uninstall everything with each reboot for each thing" and then install the new one..hopefully it doesn't gives many probs with my 660GTX Ti OC 2GB

ASUS X570 TUF GAMING PLUS, 32GB DDR4@2666 ,RYZEN 5800X3D (NO OC),GIGABYTE RTX 4070 Super GAMING OC, Western Digital Blue 4TB 5400RPM + SAMSUNG 860 EVO 500+1TB GB SSDs , OEM SATA DVD 22xNoctua NH-D15 Chromax Black, BenQ XL2420T Case: Be Quiet! DARK BASE PRO 901. PSU CORSAIR RM1200 SHIFT
Back to top
Newty182




Posts: 10805
Location: UK
PostPosted: Thu, 19th Sep 2013 18:53    Post subject:
Windows will just reinstall drivers after the reboot. Just click custom and fresh install when installing the drivers. Or use Driver Sweeper.

Ryzen 5 5600, ASUS ROG STRIX B550-F GAMING WIFI II, Corsair Vengeance RGB RT 32GB 3600MHz C16, MSI RTX 5070 Ti Ventus 3X OC , Corsair RMx Series RM750x. AOC AGON AG324UX - 4K 144Hz 1ms
Back to top
sabin1981
Mostly Cursed



Posts: 87805
PostPosted: Thu, 19th Sep 2013 18:56    Post subject:
The only downside to "fresh install" is that you lose all your custom profiles, so anything you went in with Inspector and fixed for SLi or Anti-aliasing; gone, poof, have to redo them Sad Any games that don't natively support vsync and you had to set it manually? Gone too. Sometimes fresh is TOO fresh Sad
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Thu, 19th Sep 2013 19:40    Post subject:
I used to do this 'fresh' and 'clean' installs some time ago. Now I just unpack the drivers and install them from the the Device Manager. Everything works perfectly fine and I haven't run into any problems thus far.

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Thu, 19th Sep 2013 23:00    Post subject:
Using Geforce experience to install these gave me error that physx couldn't be installed Neutral

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
Interinactive
VIP Member



Posts: 29459
PostPosted: Thu, 19th Sep 2013 23:40    Post subject:
⁢⁢


Last edited by Interinactive on Tue, 5th Oct 2021 03:00; edited 1 time in total
Back to top
tw1st




Posts: 6112
Location: New Jersey
PostPosted: Mon, 30th Sep 2013 15:49    Post subject:
http://forums.guru3d.com/showthread.php?t=381932

New beta drivers

| BenQ XL2420T 24" 120Hz | Ducky Shine III 9008 White LED - Brown MX | Logitech G9x |
| Corsair Carbide 400R | Asus Sabertooth z77 | i7 3770K @ 4.3Ghz - 1.200v | CM Hyper 212 Evo - Push/Pull |
| SLI eVGA 4GB GTX980 ACX SC | Vengeance 16GB RAM 1600 DDR3 | AX850w PSU | Samsung 840Pro 128GB SSD | WD Black 1TB HD |
Back to top
sabin1981
Mostly Cursed



Posts: 87805
PostPosted: Mon, 30th Sep 2013 16:02    Post subject:
SLi profile for a game that hasn't even got a release date except "2014", but still nothing for Shadow Warrior? Very Happy Oh well, at least the Hard Reset profile works and there's a new one for State of Decay now too.
Back to top
tw1st




Posts: 6112
Location: New Jersey
PostPosted: Mon, 30th Sep 2013 16:14    Post subject:
Sabby,

not sure if you saw this within that guru3d post, but here is an apparent fix for the Shadow Warrior SLI.

http://steamcommunity.com/app/233130/discussions/0/846965705282026457/

| BenQ XL2420T 24" 120Hz | Ducky Shine III 9008 White LED - Brown MX | Logitech G9x |
| Corsair Carbide 400R | Asus Sabertooth z77 | i7 3770K @ 4.3Ghz - 1.200v | CM Hyper 212 Evo - Push/Pull |
| SLI eVGA 4GB GTX980 ACX SC | Vengeance 16GB RAM 1600 DDR3 | AX850w PSU | Samsung 840Pro 128GB SSD | WD Black 1TB HD |
Back to top
sabin1981
Mostly Cursed



Posts: 87805
PostPosted: Mon, 30th Sep 2013 16:27    Post subject:
tw1st wrote:
Sabby,

not sure if you saw this within that guru3d post, but here is an apparent fix for the Shadow Warrior SLI.

http://steamcommunity.com/app/233130/discussions/0/846965705282026457/


Yeah, I know bud Smile I posted the SLi bits and steps in the SW thread, within minutes of the game coming out, using the Hard Reset settings, DSO reposted it on their site Very Happy I just set the SLi bits in the pre-existing SW profile, so it's not tied to anything else.
Back to top
Drowning_witch




Posts: 10818
Location: Strawberry fields
PostPosted: Mon, 30th Sep 2013 18:52    Post subject:
sweet, nv cpanel AO has been improved even more So Much Win

steam: Drowning witch
uplay: Haxeety
game completion log:
http://pastebin.com/g6MgD5DV
rig: http://www.userbenchmark.com/UserRun/2090866
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Mon, 30th Sep 2013 20:11    Post subject:
tw1st wrote:
http://forums.guru3d.com/showthread.php?t=381932

New beta drivers

Thanks! Will them out.

I wonder if there are any performance improvements for Shadow Warrior

Most likely not, but it's still worth giving a shot. Smile

A link to the featured article: http://bit.ly/19c1aPG

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."

Last edited by Raccoon on Mon, 30th Sep 2013 20:12; edited 1 time in total
Back to top
tw1st




Posts: 6112
Location: New Jersey
PostPosted: Mon, 30th Sep 2013 20:12    Post subject:
Drowning_witch wrote:
sweet, nv cpanel AO has been improved even more So Much Win



Didn't have a chance to check since I'm still at work. How is it improved exactly? In that it gives you more options via the CP (it's normally controlled by the in-game options for whatever game, no?) Or improved in terms of performance?

| BenQ XL2420T 24" 120Hz | Ducky Shine III 9008 White LED - Brown MX | Logitech G9x |
| Corsair Carbide 400R | Asus Sabertooth z77 | i7 3770K @ 4.3Ghz - 1.200v | CM Hyper 212 Evo - Push/Pull |
| SLI eVGA 4GB GTX980 ACX SC | Vengeance 16GB RAM 1600 DDR3 | AX850w PSU | Samsung 840Pro 128GB SSD | WD Black 1TB HD |
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Mon, 30th Sep 2013 20:14    Post subject:
tw1st wrote:
Drowning_witch wrote:
sweet, nv cpanel AO has been improved even more So Much Win



Didn't have a chance to check since I'm still at work. How is it improved exactly? In that it gives you more options via the CP (it's normally controlled by the in-game options for whatever game, no?) Or improved in terms of performance?

As I understand it, HBAO has been replaced with HBAO+

Read more here.

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
tw1st




Posts: 6112
Location: New Jersey
PostPosted: Mon, 30th Sep 2013 20:22    Post subject:
@Raccoon

Thanks, looks nice. I'm assuming the performance cost if up there for HBAO+. Not even sure if I have it enabled in my CP at the moment...

| BenQ XL2420T 24" 120Hz | Ducky Shine III 9008 White LED - Brown MX | Logitech G9x |
| Corsair Carbide 400R | Asus Sabertooth z77 | i7 3770K @ 4.3Ghz - 1.200v | CM Hyper 212 Evo - Push/Pull |
| SLI eVGA 4GB GTX980 ACX SC | Vengeance 16GB RAM 1600 DDR3 | AX850w PSU | Samsung 840Pro 128GB SSD | WD Black 1TB HD |
Back to top
Raccoon




Posts: 3160
Location: Poland
PostPosted: Mon, 30th Sep 2013 21:01    Post subject:
I haven't read anything, but a quick peek at this chart says it's indeed slower than regular HBAO.



Here's the full article: http://www.geforce.com/hardware/technology/hbao-plus/technology

As for the CP AO itslef, I used to enable it sometimes in the past but it literally makes my eyes ache, so I generally stay away from it.

"Anatidaephobia is the fear that somewhere in the world there is a duck watching you."

Fuck Polish government for oppressing women!

"People are such awful conversationalists that they’ll interrupt you when you’re answering a question they asked."
Back to top
sausje
Banned



Posts: 17716
Location: Limboland, Netherlands
PostPosted: Fri, 4th Oct 2013 23:38    Post subject:
Laughing at nvidia their pathetic capability of writing proper drivers:

 Spoiler:
 

Proud member of Frustrated Association of International Losers Failing Against the Gifted and Superior (F.A.I.L.F.A.G.S)
Back to top
Page 9 of 59 All times are GMT + 1 Hour
NFOHump.com Forum Index - Hardware Zone Goto page Previous  1, 2, 3 ... 8, 9, 10 ... 57, 58, 59  Next
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group