Ok, I have a 7200 RPM 8 MB cache WD 120 GB hard disk. I ran out of space and I plugged my old WD 30 GB hard disk. I want to know two things:
1) The 30GB hard disk's (WDC WD307AA-00BAA0) RPM speed.
2) How can I change the drive letters cause it used to be C=HD D=DVD-ROM E=CDRW, Now it's C=HD1 D=DVD-ROM E=HD2 F=CDRW. I want C and D to be the hard drives and E and F to be the DVD/CDRW ROMs.
well hard to say from the #, but take a look doesnt it say on the label. also if u bought it 2 or 3 years ago it is 7200 but if it is old it may be 5000
2) right click ont eh drve and go to properties and name it
well hard to say from the #, but take a look doesnt it say on the label. also if u bought it 2 or 3 years ago it is 7200 but if it is old it may be 5000
2) right click ont eh drve and go to properties and name it
I don't want to change the drive's name i want to change the letter i.e from D to E.
start - control panel - system management(systeembeheer in dutch) - computer management (computerbeheer in dutch) - disk management...you'll see all detected devices in there and are able to change drive letters. (right-click properties).
Signature/Avatar nuking: none (can be changed in your profile)
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum