Page 1 of 1 |
|
Posted: Tue, 8th Feb 2005 11:07 Post subject: Help! After flashing video card hangs computer during boot. |
|
 |
Hello,
I've got some serious problem with my video card. I tried to flash it from X800 Pro into X800XT-PE, firstly I flashed it with ATI X800XT-PE BIOS with Gainward's gvf12, then I flashed it with Gainward X800XT-PE BIOS and that screwed my card. Now my computer hangs when the card is inserted. As far as I'm concerned the hang happens during video card boot-time (before MB's BIOS boots). I tried placing another card with PCI bus, and it didn't help, even though it was set to use PCI as primary card (It boots fine without my faulty X800). So is there any solution to my problem ?
Thanks in advance.
|
|
Back to top |
|
 |
|
Posted: Tue, 8th Feb 2005 13:28 Post subject: |
|
 |
You should flash it back to X800PRO.
I once had the same problem when I flashed my 9800PRO to XT.
The bios dint work for my 9800pro and the windows colors where all messed up. So I used the original bios file (made a backup of it before I flashed the PRO bios with XT bios) and flashed it back to 9800PRO and then the problem was gone.
So every time you are planning to flash your graphics card’s bios always make a backup from the original bios.
|
|
Back to top |
|
 |
[sYn]
[Moderator] Elitist
Posts: 8374
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
Posted: Tue, 8th Feb 2005 15:26 Post subject: |
|
 |
|
|
Back to top |
|
 |
[sYn]
[Moderator] Elitist
Posts: 8374
|
Posted: Tue, 8th Feb 2005 18:21 Post subject: |
|
 |
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
Posted: Tue, 8th Feb 2005 21:43 Post subject: |
|
 |
[sYn]:
Unfortunately I haven't found any information on the possibility of video BIOS removal. I also have no access to any flashing device. So if I don't find any method for repairing it myself at home I will have to reconsile myself to the loss of video card and work with primeval Riva TNT. Any help would be appreciated.
Steve-O 2004:
I boutght it on an internet auction over a year ago, so it's not an option to return it. Most likely I'll have to sell it as damaged.
discworld:
There shall be no next time.
Neither is my English good.
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Gh0UL
Posts: 212
Location: southern AZ, USA
|
|
Back to top |
|
 |
|
|
Back to top |
|
 |
Page 1 of 1 |
All times are GMT + 1 Hour |