NFOHump.com :: View topic - Dual Channel don't work ?

Page 1 of 1

hseraphim

Posts: 143

Posted: Thu, 11th Dec 2008 15:28 Post subject: Dual Channel don't work ?	Quick Quote Quote

hi all , today i bought 2x2gb ram corsair , ok i put them on pc and them when i wanted to start it didn't boot i get this message on monitor " monitor is in power safe mod to activate monitor use computer " . k i remove one of the kit and started with just 1 and i changed some freq in bios thought now will boot with both kits well didn't ... the thing is before this was no problem with my old ram's 2x1gb corsair. for 2 hours i' tryed to get this working i fail'd. my motherboard have only 2 slots can be this the problem ? i can't say this cause the old ram kits worked lol . here is my current motherboard asus m2n-mx se click me without that integrate gfx ofc any advices what can i do to get ram working ? i'm going crazy and sorry for my eng

Richard99

Posts: 162

Posted: Thu, 11th Dec 2008 15:36 Post subject:	Quick Quote Quote

it says on page 13 of the manual that each slot only supports upto 1gb ram and the board only supports 2gb ram in total

LeoNatan
☢ NFOHump Despot ☢

Posts: 73199
Location: Ramat Gan, Israel 🇮🇱

Posted: Thu, 11th Dec 2008 15:46 Post subject:

You are out of luck:

Quote:

Dual channel memory architecture
2 x 240-pin DIMM, support max. 2GB DDR2 800/667/533 ECC and non-ECC,un-buffered memory

I recommend you look for a bit better motherboard that supports more. You can find some cheap ones that will suit your needs.

hseraphim

Posts: 143

Posted: Wed, 11th Feb 2009 19:39 Post subject:	Quick Quote Quote

coming with a question again .. didn't want to open another thread so here we goes , u have my motherboard in first post so i wanna buy a gf9800gtx soon the question is will work properly ? from what i've read in some forums pcie works with gfx that are with pcie 2.0 so i can buy it or no ?

Page 1 of 1

All times are GMT + 1 Hour