removing the stock fan out of a radeon 9800pro videocard View previous topic :: View next topic  


NFOHump.com Forum Index - Hardware Zone
Page 1 of 1
oxyeL




Posts: 7152
PostPosted: Sun, 21st May 2006 01:03    Post subject: removing the stock fan out of a radeon 9800pro videocard
Hi, I have a sapphire atlantis radeon 9800pro card, and recently I bought a new cooling for it and should receive it tomorrow. My question is how do I remove the stock fan out of it? I mean it's attached to the card by some plastic screws, and I dont see a way of screwing them out other than just smashing them with pliers.. Any suggestions?
Back to top
arw




Posts: 1281
Location: Barry - Wales - (UK)
PostPosted: Sun, 21st May 2006 18:35    Post subject:
It shoud be held on with plugs which you pinch together(not sure how else to say it) from the solder side of the board and then push them out.

Any chance of a pic..?
Back to top
pancake




Posts: 1091
Location: England
PostPosted: Mon, 22nd May 2006 08:54    Post subject:
something like this

http://www.xlr8yourmac.com/Graphics/Verax_G03_for_9800/verax_G03_9800_pro_install.html
Back to top
oxyeL




Posts: 7152
PostPosted: Mon, 22nd May 2006 11:45    Post subject:
Thank You very much, just replaced it today.
Back to top
Page 1 of 1 All times are GMT + 1 Hour
NFOHump.com Forum Index - Hardware Zone
Signature/Avatar nuking: none (can be changed in your profile)  


Display posts from previous:   

Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB 2.0.8 © 2001, 2002 phpBB Group